The Ford Barn

JohnB15632 · 01-26-2019, 08:31 PM

It seems to me that these door stops are a bit ratty.
So, I am thinking that they need to be replaced.

The problem is that I have no idea how to remove old door stops, nor do I know how to install new ones.

Can anyone out there give me a hand?

Thanks,

Gary WA · 01-26-2019, 09:31 PM

pull outward, should be a metal clip under them.?depends on year type vehicle also.

midgetracer · 01-26-2019, 11:52 PM

Pull outward, but no metal clip under them. They are a rubber block that fits in a open slot. The rubber is molded with a part that fits behind the slot. Use a blunt screwdriver to force new ones in.

DD931 · 01-27-2019, 10:56 AM

I think if you look at some new ones you'll see how they fit!

JohnB15632 · 01-27-2019, 03:19 PM

OK, I got the old ones out. I need help determining what are the new ones? I see nothing similar on the vendor's websites.

Anyone know the correct vendor and part number?

Thanks

JohnB15632 · 01-27-2019, 03:44 PM

Sponsored Links (Register now to hide all advertisements)

These just do not seem correct.

https://www.snydersantiqueauto.com/s...door%20bumpers

Thanks,

Bob C · 01-27-2019, 05:51 PM

I think the middle and bottom ones on the left side look like yours.
https://www.snydersantiqueauto.com/1...dshield-4-door

01-26-2019, 09:31 PM	#2
Gary WA Senior Member Join Date: May 2010 Location: Clinton,WA/Whidbey Island Posts: 4,101	Re: Door Stops pull outward, should be a metal clip under them.?depends on year type vehicle also. __________________ www.whidbeymodelaclub.com Last edited by Gary WA; 01-27-2019 at 10:51 AM.

01-26-2019, 11:52 PM	#3
midgetracer Senior Member Join Date: May 2010 Location: Bismarck ND Posts: 1,189	Re: Door Stops Pull outward, but no metal clip under them. They are a rubber block that fits in a open slot. The rubber is molded with a part that fits behind the slot. Use a blunt screwdriver to force new ones in.

01-27-2019, 10:56 AM	#4
DD931 Senior Member Join Date: May 2010 Location: PA Poconos Posts: 723	Re: Door Stops I think if you look at some new ones you'll see how they fit!

01-27-2019, 03:19 PM	#5
JohnB15632 Senior Member Join Date: Aug 2014 Location: Export, PA (Outside of Pittsburgh) Posts: 520	Re: Door Stops OK, I got the old ones out. I need help determining what are the new ones? I see nothing similar on the vendor's websites. Anyone know the correct vendor and part number? Thanks

01-27-2019, 03:44 PM	#6
JohnB15632 Senior Member Join Date: Aug 2014 Location: Export, PA (Outside of Pittsburgh) Posts: 520	Re: Door Stops Sponsored Links (Register now to hide all advertisements) These just do not seem correct. https://www.snydersantiqueauto.com/s...door%20bumpers Thanks,

01-27-2019, 05:51 PM	#7
Bob C Senior Member Join Date: May 2010 Location: So Cal Posts: 8,741	Re: Door Stops I think the middle and bottom ones on the left side look like yours. https://www.snydersantiqueauto.com/1...dshield-4-door