34 trans top on 32 emergency adapter

[31Abone]

Who sells 34 top on 32 trans emerg brake adapter ? see pic ..I googled it and nothing ..

[Andy]

Easy enough to make. I made mine from some angle and welded on nuts. That is a 81A top so a little different than a 34 top. The lever should be mounted higher.

[Charlie Stephens]

I also made mine before anything was available. Try MEC for one, (330) 644-3450.

Charlie Stephens

[31Abone]

Who is MEC ?

[Charlie Stephens]

Originally Posted by 31Abone

Who is MEC ?

Why don't you call them at their phone number I gave in Post #3 and ask? I am sure they could give a better response than I could.

I will take a shot. The full name is Model Engineering Company. They are a small shop that produces a few parts used by the old car enthusiast as a sideline to their main business (which I believe is a machine shop). I don't think I have ever seen an ad for them. After you call them let me know if I got the answer right.

Charlie Stephens

[Charlie ny]

31,
I've got a few '32 shift towers with the emergency brake bosses , if interested
email me cas5845@yahoo.com
Charlie ny

[Kerk]

Charlie beat me to it. What I would hav suggested. kerk

[Flathead Fever]

Originally Posted by 31Abone

Who is MEC ?

I have a couple of his '32 emergency brake mounts on '39 transmissions. I tried his old website and it pops up a different business? I use to be able to see his catalog online but that was probably 15-year's ago. He made a lot of cool stuff for '32 Fords that bolted to the original holes.

[31Abone]

I have a extra 32 bottom part with bosses but no forks ..I was lazy...seems like a lot of woark to take the forks all apart and reassemble ..getting those pins out and back in again seems like a PITA..see pic of what I'm working on..I bot this truck from a lady ! does it show ?..sc

[Charlie Stephens]

Originally Posted by Flathead Fever

I have a couple of his '32 emergency brake mounts on '39 transmissions. I tried his old website and it pops up a different business? I use to be able to see his catalog online but that was probably 15-year's ago. He made a lot of cool stuff for '32 Fords that bolted to the original holes.

That is the reason I put the phone number in Post #3, I couldn't get the web site to work either. I called and talked with him so he is still in business.

Charlie Stephens