Go Back   The Ford Barn > General Discussion > Model A (1928-31)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 01-21-2019, 09:56 AM   #1
Nosetime
Senior Member
 
Join Date: May 2017
Location: Huntington Beach, Calif
Posts: 131
Default My 29 engine resurrection update

Thanks to this Forum for info, encouragement and help to find parts, the engine is running! Some of you may remember I tore it apart and found a bad main bearing among other things! Looked to have a nice .60 over top end. So... I hand scraped a $5 swap meet rear main, installed $40 H&H flathead G7 cam, new oil pump, timing and crank gear. New water pump and fan.Lloyd Tiffany helped with the Super Winfield head and Ansen manifold. Reds header, ARP head studs and rod nuts, as per Jim Brierley. Lightened Flywheel and V8 clutch. I rebuilt a vintage Stromberg 97 that had a rare SP top on it from Ebay. 30's Mallory distributor is going to Bubbas soon. My 2 year marathon to build a Roadster from scratch is almost done. Thanks to all! Now to "Drive it like I borrowed it" and hope for the best!

https://youtu.be/4tJ-vdreoak

Last edited by Nosetime; 01-24-2019 at 08:28 AM.
Nosetime is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 03:16 AM.