Go Back   The Ford Barn > General Discussion > Model A (1928-31)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 01-11-2019, 11:45 AM   #21
dansluck
Member
 
Join Date: Dec 2014
Location: Nevada
Posts: 58
Send a message via AIM to dansluck Send a message via Yahoo to dansluck
Default Re: After Sandblastig...What have you found...

What have I found after sand blasting? I found out that I need a Beer.
dansluck is offline   Reply With Quote
Old 01-11-2019, 08:58 PM   #22
markwilltoo
Junior Member
 
Join Date: Oct 2018
Posts: 6
Default Re: After Sandblastig...What have you found...

The only way to prevent rust from eventually bubbling through the paint some years later is to use quality automotive grade epoxy primer under your paint. It's expensive, but will not allow any moisture pass through the finish. Lacquer primer begins absorbing moisture from the air as soon as it dries and will eventually rust through the primer, depending on ambient humidity if not top coated

Phosphoric acid goes inert once dry and will not provide long term protection if exposed to high humidity.
markwilltoo is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 01-18-2019, 06:42 PM   #23
Osage Orange
Member
 
Join Date: Sep 2011
Location: Powell Siding (near Cleveland), MO
Posts: 44
Default Re: After Sandblastig...What have you found...

Sunlight
Osage Orange is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 06:51 AM.