The Ford Barn

David31dlxslant · 08-31-2019, 07:38 AM

Ok, who’s the expert at professionally rebuilding a stock original carburetor for my 55 Fairlane with a 272? Thanks

Anteek29 · 08-31-2019, 08:55 AM

Sal Scicala...he's a forum member - and is the best!

40cpe · 08-31-2019, 09:08 AM

If you will indicate if it is a 2 barrel or 4 barrel it might widen your choices of rebuilders.

David31dlxslant · 08-31-2019, 09:18 AM

It’s a 2 barrel

40cpe · 08-31-2019, 09:25 AM

In addition to Sal mentioned post #2, Charlie ny is also a forum member and an expert on rebuilding the Holley 94 and 2100.
<[email protected]>

scicala · 08-31-2019, 09:54 AM

Sponsored Links (Register now to hide all advertisements)

Yes, I can do both the Holley 4000 4 barrel carb and the Holley 2 barrel carb.

[email protected] or (586) 612-1650

Sal

Daves55Sedan · 08-31-2019, 10:45 PM

Hope you don't need to rebuild as often as I do. I'm displeased with gasket sets and power valves available. These things suck! Easy to rebuild though.

Alaska Jim · 08-31-2019, 10:50 PM

I have used Sal for carbs, and I have used Charlie for fuel pumps. I can say that both have done an excellent job. The carbs that Sal did for me were the 4000 series Holley 4bbl carbs., I am sure he can do just as well on a 2bbl.

scicala · 09-01-2019, 04:34 PM

Thank you Jim.

Sal

08-31-2019, 07:38 AM	#1
David31dlxslant Senior Member Join Date: Nov 2013 Location: Ringgold,Ga Posts: 112	1955 272 carburetor rebuild Ok, who’s the expert at professionally rebuilding a stock original carburetor for my 55 Fairlane with a 272? Thanks

08-31-2019, 09:08 AM	#3
40cpe Senior Member Join Date: May 2010 Location: Star, MS Posts: 4,024	Re: 1955 272 carburetor rebuild If you will indicate if it is a 2 barrel or 4 barrel it might widen your choices of rebuilders.

08-31-2019, 09:18 AM	#4
David31dlxslant Senior Member Join Date: Nov 2013 Location: Ringgold,Ga Posts: 112	Re: 1955 272 carburetor rebuild It’s a 2 barrel

08-31-2019, 09:25 AM	#5
40cpe Senior Member Join Date: May 2010 Location: Star, MS Posts: 4,024	Re: 1955 272 carburetor rebuild In addition to Sal mentioned post #2, Charlie ny is also a forum member and an expert on rebuilding the Holley 94 and 2100. <[email protected]>

08-31-2019, 09:54 AM	#6
scicala Senior Member Join Date: Jun 2010 Location: Detroit suburb, MI Posts: 3,698	Re: 1955 272 carburetor rebuild Sponsored Links (Register now to hide all advertisements) Yes, I can do both the Holley 4000 4 barrel carb and the Holley 2 barrel carb. [email protected] or (586) 612-1650 Sal

08-31-2019, 08:55 AM	#2
Anteek29 Senior Member Join Date: Dec 2014 Location: Santa Maria, CA Posts: 985	Re: 1955 272 carburetor rebuild Sal Scicala...he's a forum member - and is the best! __________________ Alan 1929 Special Coupe 1941 Pick-Up 1955 Victoria

08-31-2019, 10:50 PM	#8
Alaska Jim Senior Member Join Date: May 2010 Location: Palmer, Alaska Posts: 1,575	Re: 1955 272 carburetor rebuild I have used Sal for carbs, and I have used Charlie for fuel pumps. I can say that both have done an excellent job. The carbs that Sal did for me were the 4000 series Holley 4bbl carbs., I am sure he can do just as well on a 2bbl.

09-01-2019, 04:34 PM	#9
scicala Senior Member Join Date: Jun 2010 Location: Detroit suburb, MI Posts: 3,698	Re: 1955 272 carburetor rebuild Thank you Jim. Sal

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode