Go Back   The Ford Barn > The Swap Meet > Wanted > Model-T

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 11-11-2012, 01:00 PM   #1
dwollam
Member
 
dwollam's Avatar
 
Join Date: Sep 2011
Location: Madras Oregon
Posts: 84
Default 1913-22 trunk lid HANDLES/LATCHES needed

City: Madras
State: Oregon

I am looking for a roadster 1913-22 turtle deck lid for my '15 Speedster project. This is the square lid with 2 handles, early ones have cast handles, later have stamped steel. Corners of the lid are rounded. Doesn't matter to me which year as they will all work. For the right price I would buy the turtle deck and lid if I can't find just a lid by itself.

These differ from the 22-25 in that those are rectangular and have square corners and no handles, only a keyhole.

Thank you.

Last edited by dwollam; 11-25-2012 at 09:30 PM.
dwollam is offline   Reply With Quote
Old 11-25-2012, 09:29 PM   #2
dwollam
Member
 
dwollam's Avatar
 
Join Date: Sep 2011
Location: Madras Oregon
Posts: 84
Default Re: 1913-22 trunk lid needed

I found a deck lid, now I need the 2 handle/latches for it.
Thanks,
Dave
dwollam is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 11-29-2012, 10:16 PM   #3
redmodelt
Senior Member
 
redmodelt's Avatar
 
Join Date: May 2010
Location: Portland OR
Posts: 5,364
Default Re: 1913-22 trunk lid HANDLES/LATCHES needed

1915 up used a key so would only have a single hole in the bottom center.
http://www.modeltford.com/model-t-parts/body/trunk/
redmodelt is offline   Reply With Quote
Old 12-01-2012, 07:31 PM   #4
dwollam
Member
 
dwollam's Avatar
 
Join Date: Sep 2011
Location: Madras Oregon
Posts: 84
Default Re: 1913-22 trunk lid HANDLES/LATCHES needed

I believe the roadster used the 2 handles through early 22 but the coupe had a key hole from around 15 and later. Late 22 to 25 the roadster went to the rectangular deck lid with the key. Anyway, I have the deck lid that needs 2 handles.
dwollam is offline   Reply With Quote
Old 12-02-2012, 01:09 AM   #5
redmodelt
Senior Member
 
redmodelt's Avatar
 
Join Date: May 2010
Location: Portland OR
Posts: 5,364
Default Re: 1913-22 trunk lid HANDLES/LATCHES needed

I think you are right.
MarkG
redmodelt is offline   Reply With Quote
Old 12-13-2012, 08:28 PM   #6
dwollam
Member
 
dwollam's Avatar
 
Join Date: Sep 2011
Location: Madras Oregon
Posts: 84
Default Re: 1913-22 trunk lid HANDLES/LATCHES needed

Sponsored Links (Register now to hide all advertisements)
btt
Still need latches.
dwollam is offline   Reply With Quote
Old 12-30-2012, 12:47 AM   #7
dwollam
Member
 
dwollam's Avatar
 
Join Date: Sep 2011
Location: Madras Oregon
Posts: 84
Default Re: 1913-22 trunk lid HANDLES/LATCHES needed

Too cold here to work on it but I am still Looking!

Dave
dwollam is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 10:23 AM.