03-29-2019, 04:52 PM | #1 |
Senior Member
Join Date: Aug 2016
Location: Alberta
Posts: 930
|
No spark?
I rebuilt the engine (59A) in my tow truck. It ran pretty good before I pulled it but now, I have no spark. Points are new and set at 15 thou, cap and rotor are new as are the plugs. I had no spark using the condenser that was in it before so I replaced the condenser and still no spark. I had required the truck so, to eliminate any issues there, I ran a jumper wire from the coil to the negative on the battery, no spark. Battery is fully charged and it turns over very well. I'm out of ideas. What am I missing??.
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|