Go Back   The Ford Barn > General Discussion > Model A (1928-31)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 03-10-2018, 02:53 PM   #1
roy green coupe
Member
 
Join Date: Nov 2017
Posts: 34
Default tie rod questions

While looking around under my 30 coupe I noticed that when the wheels were turned to full lock either direction the tie rod was rubbing on the nut for the front motor mount. I think this is at least partially because I need a new spring but I also noticed the tie rod looked slightly bent. I decided to take it off and see if I could straighten it. I was surprised to find it was soft and easily bent,I could bend it over my knee with my hands rather easily. I stripped off all the paint and this part looks like it could have been an original ford but I wonder. There are old wear marks from the draglink rubbing in the past and old wrench marks that were painted over. The reason I was surprised at how easy it was to bend is I thought this was solid rod however I could hear something sliding back and forth inside and I realized this was tubing With plugs in the ends and rather soft tube at that. In Brattons catalog they list a tie rod made from solid steel rod which I will be ordering. I'm wondering if this can be an original part or if it is poor quality replacement ? It is tube .685 outside , .135 wall and soft as plain mild steel. Where the original tie rods solid like Brattons?
roy green coupe is offline   Reply With Quote
Old 03-10-2018, 04:11 PM   #2
Bob C
Senior Member
 
Join Date: May 2010
Location: So Cal
Posts: 6,340
Default Re: tie rod questions

The originals were hollow.

Bob
Bob C is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 06:36 AM.