The Ford Barn

GaryU. · 06-26-2018, 05:02 PM

Trying to help a Barn member looking for a 41 sector shaft. I have 2 steering boxes and parts that I acquired at an auction last year. One box is stamped with the prefix O1A and the other with 21A. Both had in them an identical sector shaft that I assume was used over various years and would like verification on this. Pictured is the better sector, although used I think it's in good shape and would like to get feedback on this. My cell phone pictures to him were not great so thought I would try the forum to post better photos and get feedback on the condition and value. Thanks, Gary

Gary in La. · 06-26-2018, 06:11 PM

The sector shaft 78-3575 is used from 1937 -1948.

JSeery · 06-26-2018, 06:13 PM

Is it also the same for F1?

Gary in La. · 06-26-2018, 06:49 PM

I believe it is. The book shows Pass '37-48, Commercial & 122" truck '37-47

JSeery · 06-26-2018, 06:50 PM

That was my understanding.

1963turnerjohn · 06-26-2018, 08:24 PM

Sponsored Links (Register now to hide all advertisements)

So on the above sector shafts - are the part #s correct to use on a 1941 Car steering box??

V8COOPMAN · 06-26-2018, 08:31 PM

Quote:

Originally Posted by Gary in La.

The sector shaft 78-3575 is used from 1937 -1948.

As Gary says above, SAME sector '37-'48! DD

Lawson Cox · 06-26-2018, 09:46 PM

What would a NORS one be worth? I have on that I'm probably never going to use.

1963turnerjohn · 06-26-2018, 10:14 PM

Lawson - see your messages

GaryU. · 06-27-2018, 02:45 PM

Since it looks like Lawson was able to help John out I have listed the sector shaft and other steering box parts in the Swap section. Hope this thread helped John out and at least it wasn't about oil!

JSeery · 06-27-2018, 02:47 PM

Quote:

Originally Posted by GaryU.

at least it wasn't about oil!

Good comment!

06-26-2018, 06:11 PM	#2
Gary in La. Senior Member Join Date: May 2010 Location: Louisiana Posts: 866	Re: Sector shaft years? The sector shaft 78-3575 is used from 1937 -1948.

06-26-2018, 06:13 PM	#3
JSeery Member Emeritus Join Date: Nov 2012 Location: Wichita KS Posts: 16,132	Re: Sector shaft years? Is it also the same for F1?

06-26-2018, 06:49 PM	#4
Gary in La. Senior Member Join Date: May 2010 Location: Louisiana Posts: 866	Re: Sector shaft years? I believe it is. The book shows Pass '37-48, Commercial & 122" truck '37-47

06-26-2018, 06:50 PM	#5
JSeery Member Emeritus Join Date: Nov 2012 Location: Wichita KS Posts: 16,132	Re: Sector shaft years? That was my understanding.

06-26-2018, 08:24 PM	#6
1963turnerjohn Senior Member Join Date: Dec 2011 Location: Ann Arbor / Canton Michigan Posts: 318	Re: Sector shaft years? Sponsored Links (Register now to hide all advertisements) So on the above sector shafts - are the part #s correct to use on a 1941 Car steering box??

06-26-2018, 09:46 PM	#8
Lawson Cox Senior Member Join Date: May 2010 Location: Above the gnat line in Georgia Posts: 7,009	Re: Sector shaft years? What would a NORS one be worth? I have on that I'm probably never going to use. __________________ Life is like a roll of toilet paper. The closer to the end, the faster it goes. It is better to be seen, than viewed. "We sleep safe in our beds because rough men stand ready in the night to visit violence on those who would do us harm".

06-26-2018, 10:14 PM	#9
1963turnerjohn Senior Member Join Date: Dec 2011 Location: Ann Arbor / Canton Michigan Posts: 318	Re: Sector shaft years? Lawson - see your messages

06-27-2018, 02:45 PM	#10
GaryU. Senior Member Join Date: May 2010 Location: Beaver Dam, Wisconsin Posts: 821	Re: Sector shaft years? Since it looks like Lawson was able to help John out I have listed the sector shaft and other steering box parts in the Swap section. Hope this thread helped John out and at least it wasn't about oil!