How/where to fill 37 gearbox?

[cajunfirehawk]

Just finished up my 36 to 37 gearbox swap and ready to fill my gearbox, assume one of the nuts shown in the attached pic is the fill location? Can I melt/heat up some cornhead grease and put it in a syringe to inject in to the fill hole?

Cant imagine its takes very much?


(in hindsight, filling the box prior to mounting in the frame would have been easier)

[JSeery]

The nut with the star under it is the adjustment. The other one is the fill.

[cajunfirehawk]

Originally Posted by JSeery

The nut with the star under it is the adjustment. The other one is the fill.

Kind of thought so, but thanks for confirming JSeery !

[Mart]

I use some grease similar to the cornhead grease and just use a grease gun to squirt it in there. Just put the end of the gun into the hole and pump (no pressure, just splurging in).

[cajunfirehawk]

Sponsored Links (Register now to hide all advertisements)

Originally Posted by Mart

I use some grease similar to the cornhead grease and just use a grease gun to squirt it in there. Just put the end of the gun into the hole and pump (no pressure, just splurging in).

OK, thanks Mart, Cheers!