Go Back   The Ford Barn > General Discussion > Model A (1928-31)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 06-22-2020, 05:36 PM   #1
larry harding
Senior Member
 
Join Date: Sep 2015
Location: western n.c.
Posts: 391
Default smith-gordon frame question

i am helping a friend who is building up a model a- smith gordon air compressor. he has a frame that was under a compressor, but someone had cut the front horns off too short and welded in the cross member. i removed the cross member to be used in another frame he has. the reason it was welded in was only the top front and the out side frame(2 on the left and 1 on the right) rivet holes line up. i held the cross member up to an extra frame i have and all the rivet holes line up. can someone explain what is going on here? i know there are several differences between the 28-29 verses the 30-31's, but i have no idea what year any of the frames are.
larry harding is offline   Reply With Quote
Old 06-22-2020, 06:42 PM   #2
reggiedog
Senior Member
 
reggiedog's Avatar
 
Join Date: Jun 2011
Posts: 890
Default Re: smith-gordon frame question

The only advice I can give you is to call Steve Becker at Berts as he can tell you what you want to know, As he has a great big junk yard of these cars out in CO and many frames of all years so he would be the one to talk to as I would before you go any farther on the frame.

His number is 1-800-321-1931 ask for Steve as he is the owner of the place and there not open on Mondays it's Tuesday to Saturday that there open, and Tuesdays is there busy day just explain what you are doing and he should be able to help you out.

Reggiedog

Last edited by reggiedog; 06-22-2020 at 06:50 PM.
reggiedog is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 06-22-2020, 07:09 PM   #3
BigE
Junior Member
 
Join Date: May 2010
Location: So Plymouth NY
Posts: 19
Default Re: smith-gordon frame question

I can sell you one for $800.00 & you don't have to work on it.
BigE is offline   Reply With Quote
Old 06-23-2020, 06:29 AM   #4
larry harding
Senior Member
 
Join Date: Sep 2015
Location: western n.c.
Posts: 391
Default Re: smith-gordon frame question

not interested in buying a compressor, i'm just helping a friend who just turned 90 and is still tackling projects. i just hit 75 and i think he feels better than i do. my question was from being curious about the quirks of these beasts.
larry harding is offline   Reply With Quote
Old 06-23-2020, 08:20 AM   #5
reggiedog
Senior Member
 
reggiedog's Avatar
 
Join Date: Jun 2011
Posts: 890
Default Re: smith-gordon frame question

I'm not interested in buying one either I just thought you needed help with the frame that you are working on that's it, but good luck with it if you don't need any help with it as I just was telling you of a place to call to get the help you needed.

Reggiedog
reggiedog is offline   Reply With Quote
Old 06-23-2020, 08:47 AM   #6
redmodelt
Senior Member
 
redmodelt's Avatar
 
Join Date: May 2010
Location: Portland OR
Posts: 6,339
Default Re: smith-gordon frame question

Sponsored Links (Register now to hide all advertisements)
Here are a whole lot of pages on the Smith Air Compressors;


https://www.google.com/search?client=firefox-b-1-d&q=Ford+Model+a+Smith+air+compresso


This might help (Thank you Ronnie Lawson, post No 10)

https://fordbarn.com/forum/showthread.php?t=51830 )
__________________
I know the voices aren't real but damn they have some good ideas!
redmodelt is offline   Reply With Quote
Old 06-23-2020, 09:55 AM   #7
rotorwrench
Senior Member
 
rotorwrench's Avatar
 
Join Date: Jun 2010
Location: San Antonio, Texas
Posts: 16,367
Default Re: smith-gordon frame question

One of out frequent contributors has a relatively complete study of the model A frame evolution. You might want to check that out when questioning actual model A frame members if that is what this is in reference to.
http://www.plucks329s.org/frame.htm
rotorwrench is offline   Reply With Quote
Old 06-23-2020, 04:35 PM   #8
larry harding
Senior Member
 
Join Date: Sep 2015
Location: western n.c.
Posts: 391
Default Re: smith-gordon frame question

thanks i'm going to check those web sites as soon as i have time, maybe something there that will help me. took a quick glance and looks interesting.
larry harding is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 08:20 AM.