|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
01-10-2021, 07:33 PM | #1 |
Senior Member
Join Date: Jan 2020
Location: SF Bay Area
Posts: 1,043
|
Cut code for lock cylinder?
Folks - picture is of the door lock from my Town Sedan. No key. Would any of you happen to have the cut code for the A1213? And what blank? I'd like to try my local locksmith and give him all the help I can.
Thanks a million. JayJay
__________________
JayJay San Francisco Bay Area ------------------------ 1930 Murray Town Sedan 1931 Briggs S/W Town Sedan |
01-10-2021, 07:53 PM | #2 |
Senior Member
Join Date: May 2010
Location: Richmond, VA
Posts: 187
|
Re: Cut code for lock cylinder?
A1213 = 23542 for a Briggs and Stratton cut.
|
Sponsored Links (Register now to hide all advertisements) |
|
01-10-2021, 08:00 PM | #3 |
Senior Member
Join Date: May 2010
Posts: 226
|
Re: Cut code for lock cylinder?
The cut code for A1213 is 23542 this tells him how deep to make each cut, he will also need to know how much space between the cuts or spacing. Use Briggs & Stratton Gas Cap spacing. Most door locks use a B5 blank, try that first and if it doesn't go in properly try a B1 blank.
|
01-10-2021, 08:13 PM | #4 |
Senior Member
Join Date: Jan 2020
Location: SF Bay Area
Posts: 1,043
|
Re: Cut code for lock cylinder?
Sponsored Links (Register now to hide all advertisements)
JayJay
__________________
JayJay San Francisco Bay Area ------------------------ 1930 Murray Town Sedan 1931 Briggs S/W Town Sedan |
Thread Tools | |
Display Modes | |
|
|
Sponsored Links (Register now to hide all advertisements) |
|