|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
12-20-2018, 05:28 PM | #1 |
Junior Member
Join Date: Mar 2017
Posts: 24
|
Radius ball bolts
Can I replace the radius ball bolts without removing the transmission from the car?
__________________
"Half the people you meet are below average". |
12-20-2018, 08:49 PM | #2 |
Senior Member
Join Date: May 2010
Location: Portland OR
Posts: 6,340
|
Re: Radius ball bolts
Yes With the radius rod out of the way. They can be lifted out and put in thru the hole the upper radius ball plate rides in.
__________________
I know the voices aren't real but damn they have some good ideas! |
Sponsored Links (Register now to hide all advertisements) |
|
12-20-2018, 10:11 PM | #3 |
Senior Member
Join Date: Nov 2018
Location: Farmington MI
Posts: 284
|
Re: Radius ball bolts
After reading a long post about how to retrieve bolts lost into the dark mysterious depths of the clutch housing. Suggest that you attach a length of thin wire to the bolts before removing and again prior to installation. Secure to the cotter pin holes. Use the wire to feed the new bolts through the holes.
Joe B |
12-20-2018, 10:51 PM | #4 |
Junior Member
Join Date: Mar 2017
Posts: 24
|
Re: Radius ball bolts
Thanks....good advice
__________________
"Half the people you meet are below average". |
12-20-2018, 11:22 PM | #5 |
Senior Member
Join Date: Sep 2010
Location: Danville, CA
Posts: 1,554
|
Re: Radius ball bolts
Sponsored Links (Register now to hide all advertisements)
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|