The Ford Barn

kimeccles · 05-22-2018, 06:42 PM

Hi,

I know that I need to install 3 tabs that hold the vacuum hose above the swing windshield. It looks like they could have the curved hose holders either direction.

Should the hose and curved part of the 3 header tabs be to the front or rear of the car?

Also it seems weird but my car has a channel that the hose seems to fit into without a the tabs and not sure why it is there.

thanks

1930artdeco · 05-22-2018, 07:06 PM

Sponsored Links (Register now to hide all advertisements)

I think mine faced to the rear, but it has been awhile. I figure as long as it fits and the window closes it is correct. Can you post a picture of the channel you are describing.
Mike

05-22-2018, 06:42 PM	#1
kimeccles Senior Member Join Date: Jul 2017 Location: Spokane, Washington state Posts: 250	vacuum wiper hose header tab brackets Hi, I know that I need to install 3 tabs that hold the vacuum hose above the swing windshield. It looks like they could have the curved hose holders either direction. Should the hose and curved part of the 3 header tabs be to the front or rear of the car? Also it seems weird but my car has a channel that the hose seems to fit into without a the tabs and not sure why it is there. thanks __________________ 68B frame# late May1930, fixed seat, Briggs build plate# & most parts, indicate July, or early Aug. 1930.

05-22-2018, 07:06 PM	#2
1930artdeco Senior Member Join Date: May 2010 Location: Lynden, Wa Posts: 3,550	Re: vacuum wiper hose header tab brackets Sponsored Links (Register now to hide all advertisements) I think mine faced to the rear, but it has been awhile. I figure as long as it fits and the window closes it is correct. Can you post a picture of the channel you are describing. Mike __________________ 1930 TownSedan (Briggs) 1957 Country Sedan