Go Back   The Ford Barn > The Swap Meet > Wanted > Late V8

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 06-24-2013, 04:59 PM   #1
whisper38
Junior Member
 
whisper38's Avatar
 
Join Date: Jun 2013
Posts: 9
Default 1957 ranchero

City: marion
State: nc

Looking for ranchero script,also other chrome exterior molding,left side window vent complete.if you have any please send me a parts list of what you have.Not looking for new stuff unless its cheap.
whisper38 is offline   Reply With Quote
Old 06-24-2013, 10:22 PM   #2
cb
Senior Member
 
Join Date: May 2010
Posts: 124
Default Re: 1957 ranchero

What other moldings do you need.
cb is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 06-25-2013, 06:18 AM   #3
Felby
Senior Member
 
Join Date: May 2010
Location: North Augusta, SC
Posts: 133
Default Re: 1957 ranchero

http://www.dearbornclassics.com/fend...1957-1958.html
Felby is offline   Reply With Quote
Old 06-26-2013, 08:22 PM   #4
whisper38
Junior Member
 
whisper38's Avatar
 
Join Date: Jun 2013
Posts: 9
Default Re: 1957 ranchero

Quote:
Originally Posted by cb View Post
What other moldings do you need.
The chrome corner bed rails at the top of the window,mine are in real bad shape.
whisper38 is offline   Reply With Quote
Old 06-26-2013, 11:47 PM   #5
cb
Senior Member
 
Join Date: May 2010
Posts: 124
Default Re: 1957 ranchero

Good luck finding nice ones, they are the only two pieces that were chrome plated the rest of the bed trim is stainless.
cb is offline   Reply With Quote
Old 09-03-2013, 08:38 PM   #6
whisper38
Junior Member
 
whisper38's Avatar
 
Join Date: Jun 2013
Posts: 9
Default Re: 1957 ranchero

Sponsored Links (Register now to hide all advertisements)
Also in need of the inner wheelwell trim pieces,I will pay a fair price for the pair.I'll even take a paper template of them,so I can make a set.
Attached Images
File Type: jpg well.jpg (31.8 KB, 11 views)

Last edited by whisper38; 09-04-2013 at 06:06 PM.
whisper38 is offline   Reply With Quote
Old 09-16-2013, 09:45 PM   #7
cb
Senior Member
 
Join Date: May 2010
Posts: 124
Default Re: 1957 ranchero

If your still needing the wheel well trim pieces I have a pair, the first few inches of the trim that face the cab are badly rusted but are still intact complete with the screw holes. $35 for the pair plus shipping.
cb is offline   Reply With Quote
Old 09-20-2013, 12:04 PM   #8
whisper38
Junior Member
 
whisper38's Avatar
 
Join Date: Jun 2013
Posts: 9
Default Re: 1957 ranchero

cb
Thanks for replying,I will have to hold off for now,the car is in the shop either to get a new rebuilt 302 or have the 292 rebuilt,then its going up for sale.
whisper38 is offline   Reply With Quote
Old 09-23-2013, 08:30 PM   #9
Frankenstein57
Member
 
Frankenstein57's Avatar
 
Join Date: Jan 2012
Location: Waukesha,Wisconsin
Posts: 85
Default Re: 1957 ranchero

A small percentage of the ranchero upper bed rail corners are stainless, they do exist. The story goes that it was hard to stamp them, so many were produced with steel, then plated. I had two plated for $75 Mark
Frankenstein57 is offline   Reply With Quote
Old 09-24-2013, 06:36 AM   #10
whisper38
Junior Member
 
whisper38's Avatar
 
Join Date: Jun 2013
Posts: 9
Default Re: 1957 ranchero

the upper are a problem,I'm going to have a friend of mine chrome powder coat them,Then once the new engine goes in .Its going to put up for sale,its been a money pit for me.If I can get it sold I'll get or build a custom 1937 ford truck.Its just been one thing after another.
whisper38 is offline   Reply With Quote
Old 09-26-2013, 09:14 PM   #11
Frankenstein57
Member
 
Frankenstein57's Avatar
 
Join Date: Jan 2012
Location: Waukesha,Wisconsin
Posts: 85
Default Re: 1957 ranchero

So you are thinking the 37 will be a bargain build?
Frankenstein57 is offline   Reply With Quote
Old 09-27-2013, 06:47 PM   #12
whisper38
Junior Member
 
whisper38's Avatar
 
Join Date: Jun 2013
Posts: 9
Default Re: 1957 ranchero

Quote:
Originally Posted by Frankenstein57 View Post
So you are thinking the 37 will be a bargain build?
I didn't say that,new chassic new body new frame,new motor,everything will be new from the ground up.I've already put $16000.00 in the ranchero,and hope to at least break even on it.its getting rebuilt 302 and rebuilt transmission,new 4 barrel and intake ,new disc brakes on the front,new wheels and tires,its been a interesting trip on it,but need to move on to something else.
whisper38 is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 08:58 PM.