The Ford Barn

wkuehnis · 07-30-2018, 01:25 PM

From time to time I had a horrible noise from my flywheel cover.
Now I removed the starter, then mounted a magnet on the flywheel and turned it. This way I removed 2 screws and safety washer.
Question: where are they from? Please see the attached picture

160B · 07-30-2018, 01:31 PM

bolts from the starter Bendix

https://www.brattons.com/5-16-bendix...k-washers.html

midgetracer · 07-30-2018, 02:07 PM

160B is correct

Jay in Mass · 07-30-2018, 02:48 PM

Quote:

Originally Posted by midgetracer

160B is correct

X 3 Starter drive.

wkuehnis · 07-30-2018, 11:09 PM

Great,
then there is no problem anymore.
Then the previous owner let it fall in once.

Thanks for your help.

Willi

redmodelt · 07-31-2018, 10:43 AM

Sponsored Links (Register now to hide all advertisements)

My 29 had like 8 or 9 in the bottom of the flywheel housing all glued in the gunk from leaks and dirt.

Y-Blockhead · 07-31-2018, 11:41 AM

I have a set just like yours...

07-30-2018, 01:31 PM	#2
160B Senior Member Join Date: Aug 2010 Location: Port Orchard, WA Posts: 1,498	Re: Flywheel cover: removed 2 screws. Where are they from? bolts from the starter Bendix https://www.brattons.com/5-16-bendix...k-washers.html __________________ 1931 160B & 1931 68B If you don't have time to do it right the 1st time, how do you have time to do it the 2nd time?

07-30-2018, 02:07 PM	#3
midgetracer Senior Member Join Date: May 2010 Location: Bismarck ND Posts: 1,189	Re: Flywheel cover: removed 2 screws. Where are they from? 160B is correct

07-30-2018, 11:09 PM	#5
wkuehnis Member Join Date: Dec 2016 Location: Switzerland Posts: 59	Re: Flywheel cover: removed 2 screws. Where are they from? Great, then there is no problem anymore. Then the previous owner let it fall in once. Thanks for your help. Willi

07-31-2018, 10:43 AM	#6
redmodelt Senior Member Join Date: May 2010 Location: Portland OR Posts: 6,340	Re: Flywheel cover: removed 2 screws. Where are they from? Sponsored Links (Register now to hide all advertisements) My 29 had like 8 or 9 in the bottom of the flywheel housing all glued in the gunk from leaks and dirt. __________________ I know the voices aren't real but damn they have some good ideas!

07-31-2018, 11:41 AM	#7
Y-Blockhead Senior Member Join Date: Jul 2011 Location: Redondo Beach, CA Posts: 5,848	Re: Flywheel cover: removed 2 screws. Where are they from? I have a set just like yours...