Go Back   The Ford Barn > General Discussion > Late V8 (1954+)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 08-16-2015, 08:39 PM   #1
wbedwards
Senior Member
 
wbedwards's Avatar
 
Join Date: Jan 2015
Location: Birmingham, Al.
Posts: 336
Default Mile-O-matic Tranny again

Sponsored Links (Register now to hide all advertisements)
I have the 361 V8 with 2 speed Mile-O-Matic transmission which is currently working.
I was excited finding a rebuilt tranny as a spare see link:http://fordbarn.com/forum/showthread.php?t=170433
Upon further reading, there were 2 different sized torque converters, one for the 223 six and 292 V8 and a different one for the 332 352 and 361V8. Also there were 3 different servos sizes and 4 different valve bodies one for each engine.
The tranny I bought came from a 292 V8. The tranny prefix is PBR-A and the tranny on my car has the prefix PBS-B. So... my question is, if my tranny should go out, would I be able to combine my torque converter and valve body with the guts of the spare I bought to get a working tranny or is that wishful thinking?

Last edited by wbedwards; 08-17-2015 at 08:21 AM.
wbedwards is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 08:06 PM.