Go Back   The Ford Barn > General Discussion > Early V8 (1932-53)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 01-14-2018, 07:49 PM   #1
deuce-deacon
Member
 
deuce-deacon's Avatar
 
Join Date: Jan 2013
Location: Oregon
Posts: 32
Default 1932 3W coupe window stops

Any help on this would be appreciated. I searched the forum but didn't find an answer.

I'm putting in new channels and window regulators, and the kit I purchased came with rubber pads for the window stops in the down position.

The structure of the stops is different between the left and right doors. Pic2 shows the right side door, and pic4 is the left side door. The right side has a flat pad with a little ridge on top. It appears that rubber pad will slide into the slot (like pic3), but the rubber pad is perpendicular to the window and this doesn't seem correct. And I'm not certain how it stays in place.

The left stop structure has an additional piece with two tabs on it. It's not clear how the rubber pad gets attached.

Am I missing a part? Any pictures on how these are properly mounted?

Again, thanks for your help!!
Attached Images
File Type: jpg window stop pic2.jpg (62.8 KB, 46 views)
File Type: jpg window stop pic3.jpg (71.0 KB, 49 views)
File Type: jpg window stop pic4.jpg (73.9 KB, 45 views)
deuce-deacon is offline   Reply With Quote
Old 01-14-2018, 09:44 PM   #2
BillM
Senior Member
 
BillM's Avatar
 
Join Date: May 2010
Location: Everett, WA
Posts: 504
Default Re: 1932 3W coupe window stops

Here's pictures of the window stops in my 5 window; they appear to be the same. As I recall the rubber stops are held in by bending the sides of the holders in to crimp the rubber parts in place. Front stop first; rear second.
Attached Images
File Type: jpg Front channel lower mtg. point_sm.jpg (18.6 KB, 35 views)
File Type: jpg Rear channel bottom mtg. point_sm.jpg (25.7 KB, 33 views)
__________________
My web page:
http://myplace.frontier.com/~wgmumaw/
BillM is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 01-18-2018, 11:49 PM   #3
deuce-deacon
Member
 
deuce-deacon's Avatar
 
Join Date: Jan 2013
Location: Oregon
Posts: 32
Default Re: 1932 3W coupe window stops

Thank you BillM!! Life is much simpler with a picture!!
deuce-deacon is offline   Reply With Quote
Old 03-29-2018, 05:45 PM   #4
va t
Member
 
Join Date: Oct 2010
Location: small town Iowa
Posts: 55
Default Re: 1932 3W coupe window stops

Sponsored Links (Register now to hide all advertisements)
Don't do anything to the metal tabs. Make a long screw driver type tool to reach down through top of opening in door. Twist against the rubber to remove old and to install new rubber. Once the tool is made it is easy to do.
va t is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 01:01 AM.