Go Back   The Ford Barn > General Discussion > Model T (1909-1927)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 07-12-2018, 09:06 AM   #1
jetmek
Senior Member
 
Join Date: May 2010
Location: albany
Posts: 277
Default 26/27block

Got one here with the knock out between ctr cylinders never removed. How exactly does one run throttle rod over to carb? Is it some kind of industrial engine? Just need to know if i have to open that up. Thnx
__________________
engine and component overhauls my specialty!
Website- www.godevilgarage.com
jetmek is offline   Reply With Quote
Old 07-12-2018, 11:14 AM   #2
Jack Innes
Senior Member
 
Jack Innes's Avatar
 
Join Date: May 2010
Location: Brooklin, Ontario
Posts: 682
Default Re: 26/27block

The later style carb. had the rod across the top of the engine so the hole was not necessary;
__________________
Jack Innes, Brooklin, Ontario
Jack Innes is online now   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 07-12-2018, 12:40 PM   #3
jetmek
Senior Member
 
Join Date: May 2010
Location: albany
Posts: 277
Default Re: 26/27block

Thank you!
__________________
engine and component overhauls my specialty!
Website- www.godevilgarage.com
jetmek is offline   Reply With Quote
Old 07-12-2018, 07:50 PM   #4
39portlander
Senior Member
 
39portlander's Avatar
 
Join Date: May 2010
Location: Suth'N Maine
Posts: 1,460
Default Re: 26/27block

Jack I like that oiler and mount you have on the fire wall, is it possible you could post a few close ups of your set up thanks. Scott
39portlander is offline   Reply With Quote
Old 07-12-2018, 10:52 PM   #5
Jack Innes
Senior Member
 
Jack Innes's Avatar
 
Join Date: May 2010
Location: Brooklin, Ontario
Posts: 682
Default Re: 26/27block

Quote:
Originally Posted by 39portlander View Post
Jack I like that oiler and mount you have on the fire wall, is it possible you could post a few close ups of your set up thanks. Scott


Sorry, the picture is not my car. It was just used to illustrate the carb. linkage.


Jack
__________________
Jack Innes, Brooklin, Ontario
Jack Innes is online now   Reply With Quote
Old 07-13-2018, 12:03 AM   #6
redmodelt
Senior Member
 
redmodelt's Avatar
 
Join Date: May 2010
Location: Portland OR
Posts: 3,830
Default Re: 26/27block

the oiler is just a standard one, you can buy the base/holder from the suppliers.
__________________
I know the voices aren't real but damn they have some good ideas!
redmodelt is offline   Reply With Quote
Old 07-13-2018, 11:08 AM   #7
nhusa
Senior Member
 
nhusa's Avatar
 
Join Date: Oct 2011
Location: Newfields NH
Posts: 479
Default Re: 26/27block

Lang's has a conversion kit #6299CL
Don't forget to get the clamp on throttle rod leaver # 6297
nhusa is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 10:09 PM.