|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
08-29-2017, 05:31 PM | #1 |
Junior Member
Join Date: Aug 2017
Location: Marblehead, MA
Posts: 13
|
Dual Cut Out Regulator
I am rebuilding a 1936 Phaeton I had in college. It appears that the generator has a dual cut out regulator. Any one know anything about these?
|
08-29-2017, 05:45 PM | #2 |
Senior Member
Join Date: May 2015
Posts: 8,076
|
Re: Dual Cut Out Regulator
See this thread > https://fordbarn.com/forum/showthrea...=Generator+Cut
__________________
The only thing nice about being imperfect is the joy it brings to others.... "Silver rings, your butt! Them's washers!" "We shot our way out of that town for a dollar's worth of steel holes!" - from 'The Wild Bunch' - 1969 https://www.youtube.com/watch?v=7NReUd2_0u0 |
Sponsored Links (Register now to hide all advertisements) |
|
08-29-2017, 05:52 PM | #3 |
Senior Member
Join Date: Jun 2010
Location: San Antonio, Texas
Posts: 16,425
|
Re: Dual Cut Out Regulator
That looks more like the Delco Remy unit like GM used. My old Harley 45 has a 3-brush gen with one like that but it's just a cut out of a different shape. It has a terminal for a warning light if I remember correctly. The big oval shaped ones were dual charge rate type. All a standard 3-brush generator needs is a decent cut out or one of those aftermarket diodes in a cut out can. Fun Products makes a solid state regulator that fits in a cut out can but it's limited on what it works with.
|
08-29-2017, 08:35 PM | #4 |
Senior Member
Join Date: May 2010
Location: Melbourne Australia.
Posts: 2,078
|
Re: Dual Cut Out Regulator
Yep, that looks like a standard Delco or Autolite cut out. The 34 ford type oval shape cut out and regulator in one unit is a little larger than yours and has the extra field terminal underneath the base. They were generally fitted to cars that had radios in 1934 & 1935 and were then discontinued. Yours should have the round Ford cut out with two terminals, one at front for battery power wire and rear terminal for generator wire. It may have an earth or ground wire out of the generator to a base mounting screw of the cut out. Regards, Kevin.
|
08-30-2017, 07:01 AM | #5 |
Junior Member
Join Date: Aug 2017
Location: Marblehead, MA
Posts: 13
|
Re: Dual Cut Out Regulator
Sponsored Links (Register now to hide all advertisements)
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|