The Ford Barn

Ryguy442 · 06-15-2017, 03:12 PM

Ok somehow I lost the keys to my 56 mercury, my question is, is there any way I can get the lock cylinder out without the key or should I just buy a whole new switch?

Thanks

Ryan

Sent from my iPhone using Tapatalk

54vicky · 06-15-2017, 04:06 PM

you may be able to remove the ignition switch depending on your ability.I do not think it will help as I do not think there is a number on switch to have a new key cut.do not forget to disconnect the battery to avoid shorting a wire or two while removing.

Ryguy442 · 06-15-2017, 07:06 PM

I have the switch hanging under there now. I just didn't want to disconnect the wiring till I have a new switch if I had to get one

Sent from my iPhone using Tapatalk

frank long island · 06-15-2017, 07:12 PM

if you can get the cylinder out a locksmith can make you a key or just take the whole swtich

40cpe · 06-15-2017, 07:14 PM

Most lock smiths can cut a key to your switch. If you are in a metropolitan area call around and ask if they can make you a key. Disconnect the wires and take it to him.

EDIT sorry Frank. I was slow typing.

cohammer60 · 06-18-2017, 08:41 PM

Sponsored Links (Register now to hide all advertisements)

Hope you got a new key , I took my ignition out of my 60 falcon in about 10 minutes by just pooping the clip off the back of it and pulling out the tumbler .

Charlie Stephens · 06-18-2017, 08:53 PM

Quote:

Originally Posted by Ryguy442

I have the switch hanging under there now. I just didn't want to disconnect the wiring till I have a new switch if I had to get one

Sent from my iPhone using Tapatalk

Add your general location to your post (and your profile) and maybe someone can recommend a locksmith.

Charlie Stephens

Charlie Stephens · 06-18-2017, 09:42 PM

Sorry, duplicate post.

Charlie Stephens

Obsolete Jim · 06-19-2017, 11:19 PM

You may be able to remove the door lock cylinder and it may have a code number on it which will match the ignition (if original). If it does, many locksmiths can still cut to that code. If not, replacement ignition cylinder is your best bet.

mobileparts · 06-21-2017, 07:00 PM

And, if you need the Ignition Switch // and / or Ignition Tumbler -- Brand New !!! -- I have both of them -- in Motorcraft and N.O.S. U.S.A. made
"aftermarket"..... (different price, of course....)
You are welcome to call me, if you need......
Craig -- 516 - 485 - 1935 .... Long Island, New York....
Good Luck!!!!

06-15-2017, 03:12 PM	#1
Ryguy442 Junior Member Join Date: Jul 2015 Posts: 5	Lost my ignition keys! Ok somehow I lost the keys to my 56 mercury, my question is, is there any way I can get the lock cylinder out without the key or should I just buy a whole new switch? Thanks Ryan Sent from my iPhone using Tapatalk

06-15-2017, 04:06 PM	#2
54vicky Senior Member Join Date: Dec 2011 Location: Oakville Ontario Posts: 586	Re: Lost my ignition keys! you may be able to remove the ignition switch depending on your ability.I do not think it will help as I do not think there is a number on switch to have a new key cut.do not forget to disconnect the battery to avoid shorting a wire or two while removing.

06-15-2017, 07:06 PM	#3
Ryguy442 Junior Member Join Date: Jul 2015 Posts: 5	Re: Lost my ignition keys! I have the switch hanging under there now. I just didn't want to disconnect the wiring till I have a new switch if I had to get one Sent from my iPhone using Tapatalk

06-15-2017, 07:12 PM	#4
frank long island Senior Member Join Date: May 2010 Location: westbury ny Posts: 854	Re: Lost my ignition keys! if you can get the cylinder out a locksmith can make you a key or just take the whole swtich

06-15-2017, 07:14 PM	#5
40cpe Senior Member Join Date: May 2010 Location: Star, MS Posts: 4,024	Re: Lost my ignition keys! Most lock smiths can cut a key to your switch. If you are in a metropolitan area call around and ask if they can make you a key. Disconnect the wires and take it to him. EDIT sorry Frank. I was slow typing.

06-18-2017, 08:41 PM	#6
cohammer60 Senior Member Join Date: Nov 2011 Location: Silver Creek GA Posts: 100	Re: Lost my ignition keys! Sponsored Links (Register now to hide all advertisements) Hope you got a new key , I took my ignition out of my 60 falcon in about 10 minutes by just pooping the clip off the back of it and pulling out the tumbler .

06-18-2017, 09:42 PM	#8
Charlie Stephens Senior Member Join Date: May 2010 Location: Southern California Posts: 7,031	Re: Lost my ignition keys! Sorry, duplicate post. Charlie Stephens Last edited by Charlie Stephens; 06-18-2017 at 09:49 PM.

06-19-2017, 11:19 PM	#9
Obsolete Jim Junior Member Join Date: Dec 2012 Location: Southern Maryland Posts: 20	Re: Lost my ignition keys! You may be able to remove the door lock cylinder and it may have a code number on it which will match the ignition (if original). If it does, many locksmiths can still cut to that code. If not, replacement ignition cylinder is your best bet. __________________ Obsolete Jim

06-21-2017, 07:00 PM	#10
mobileparts Senior Member Join Date: Feb 2014 Location: West Hempstead, New York Posts: 167	Re: Lost my ignition keys! And, if you need the Ignition Switch // and / or Ignition Tumbler -- Brand New !!! -- I have both of them -- in Motorcraft and N.O.S. U.S.A. made "aftermarket"..... (different price, of course....) You are welcome to call me, if you need...... Craig -- 516 - 485 - 1935 .... Long Island, New York.... Good Luck!!!!