Go Back   The Ford Barn > General Discussion > Early V8 (1932-53)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 09-27-2011, 12:29 PM   #1
chronisterracing
Member
 
chronisterracing's Avatar
 
Join Date: Aug 2010
Location: Illinois
Posts: 46
Default how do you remove interior door handle?

How the heck do you remove the interior door hand and window crank on a 51 tudor?

I know on the 60-70 stuff you use a shop towel and saw it around, but it isn't working on the 51.
chronisterracing is offline   Reply With Quote
Old 09-27-2011, 12:36 PM   #2
51 MERC-CT
Senior Member
 
51 MERC-CT's Avatar
 
Join Date: May 2010
Location: East Hartford, Ct
Posts: 4,420
Default Re: how do you remove interior door handle?

You should be able to push the upholstery in far enough to see if you have a horseshoe clip or a pin. Then act accordingly.
51 MERC-CT is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 09-27-2011, 02:24 PM   #3
grizz
Junior Member
 
Join Date: May 2010
Posts: 20
Default Re: how do you remove interior door handle?

51 has the wire clip. I used a thin rag like an old t shirt that will snag on the end of clip
grizz is offline   Reply With Quote
Old 09-27-2011, 02:28 PM   #4
joe plumber
Senior Member
 
Join Date: May 2010
Posts: 818
Default Re: how do you remove interior door handle?

I cut a notch in the end of a hacksaw blade,push the door panel back and hook the clip with the blade and pull back and the clip will pop right off .
joe plumber is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 02:43 AM.