Various parts needed for my 33 5W.

[panhead_pete]

Sponsored Links (Register now to hide all advertisements)

Hi Guys

I need the following, all help appreciated. Whilst Im in Australia I can easily sort something out with shipping.

....Steel floor panel / trans cover......this isn't the gearbox top,it's the actual floor panel that spans the 'box and runs up to the firewall.

....a set of seat springs, probably best to get a new repro set

....and inside wood kit , don't need the pillars but you'll probably have to buy them anyway as a kit.

.....roof timber kit

....new repro gas tank cover

....a used complete handbrake handle and lower mount.

....a new repro gearbox to chassis mount ,from memory these need to use the original cast iron insert that fastens it all to the box , so unless they come totally complete , you'll need to find a used one of them.

.....if you can get hold of a '39 onwards floorshift gearbox top , then I can get a good gearset to go in your case......much better than what you have now , you'll need the g/stick as well......

Thanks guys.