|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
03-26-2017, 08:41 PM | #1 |
Junior Member
Join Date: Aug 2012
Location: Arkansas
Posts: 15
|
1940 Ford Sedan (standard)
My grandaddy passed away in Sep., this weekend I brought home the beloved 40' Ford. I was told that a 50' Ford truck motor had been put into the car at some point. How can I tell if I am looking at a 40' or 50' for V8? . Any help would be great!
Sent from my iPhone using Tapatalk |
03-26-2017, 08:59 PM | #2 |
Senior Member
Join Date: Aug 2010
Location: newark, delaware
Posts: 3,735
|
Re: 1940 Ford Sedan (standard)
First give away is the distributor and then the thermostat necks. Makes it a 49 to 53 motor. 49 to 52 truck motor were basically a bolt in with the water pumps oil pan and exhaust manifolds
If you started with a 49 to 53 ford car motor you would have to swap the pieces i mentioned above. 53 truck motor had different wanter pumps and bellhousing which also have to be changed. |
Sponsored Links (Register now to hide all advertisements) |
|
03-26-2017, 09:09 PM | #3 |
Senior Member
Join Date: May 2010
Location: Midland Park, NJ
Posts: 3,982
|
Re: 1940 Ford Sedan (standard)
Definitely a 49 and up engine.
Curious on how the vacuum to the distributor is hooked up. Looks like the vacuum line goes to the inside. For these distributor, vacuum sourcedfrom the carb?
__________________
48 Ford Conv 56 Tbird 54 Ford Victoria |
03-26-2017, 09:10 PM | #4 | |
Junior Member
Join Date: Aug 2012
Location: Arkansas
Posts: 15
|
Re: 1940 Ford Sedan (standard)
Quote:
Thank you for the info. The car runs pretty good but has an antifreeze leak. I was looking at starting with the cheaper hoses and cables and beginning to redo the car piece by piece. Thank you again. Sent from my iPhone using Tapatalk |
|
03-26-2017, 09:12 PM | #5 |
Senior Member
Join Date: Aug 2010
Location: newark, delaware
Posts: 3,735
|
Re: 1940 Ford Sedan (standard)
|
03-26-2017, 10:10 PM | #6 |
Senior Member
Join Date: May 2010
Location: now Kuna, Idaho
Posts: 3,779
|
Re: 1940 Ford Sedan (standard)
Sponsored Links (Register now to hide all advertisements)
|
03-26-2017, 10:32 PM | #7 |
Senior Member
Join Date: Mar 2017
Location: The sleepy San Fernando Valley
Posts: 394
|
Re: 1940 Ford Sedan (standard)
Makes me glad I have a flathead six... way simpler!
|
03-26-2017, 10:38 PM | #8 |
Senior Member
Join Date: Jan 2011
Location: sw minnesota
Posts: 4,574
|
Re: 1940 Ford Sedan (standard)
lets see the rest of the car!!!
|
03-26-2017, 11:56 PM | #9 | ||
Senior Member
Join Date: May 2010
Location: Minnesota
Posts: 1,826
|
Re: 1940 Ford Sedan (standard)
Quote:
Quote:
And we need some pictures of the whole car. Last edited by rich b; 03-26-2017 at 11:58 PM. Reason: more |
||
03-27-2017, 01:09 AM | #10 |
Senior Member
Join Date: May 2010
Location: now Kuna, Idaho
Posts: 3,779
|
Re: 1940 Ford Sedan (standard)
After enlarging the photo my feeble eyes do see the line as you say.
|
03-27-2017, 01:22 AM | #11 |
Senior Member
Join Date: May 2010
Location: Coral Springs FL
Posts: 10,943
|
Re: 1940 Ford Sedan (standard)
Nice car.
Don't forget to add the wire for the temperature sending unit. If possible, please post more photos of the car, including the engine compartment and interior. The posted photo is too large. Enjoy. |
03-27-2017, 07:02 AM | #12 |
Junior Member
Join Date: Aug 2012
Location: Arkansas
Posts: 15
|
Re: 1940 Ford Sedan (standard)
Ask and ye shall receive.
Sent from my iPhone using Tapatalk |
03-27-2017, 08:28 AM | #13 |
Senior Member
Join Date: Jun 2010
Location: San Antonio, Texas
Posts: 16,436
|
Re: 1940 Ford Sedan (standard)
Nice looking old Tudor Sedan. It looks like a more durable vinyl trim set was installed at some point. Looks to be set up for driving. Sure a lot of fun driving them.
|
03-27-2017, 09:12 AM | #14 |
Senior Member
Join Date: May 2010
Location: Southern Illinois
Posts: 3,795
|
Re: 1940 Ford Sedan (standard)
|
03-27-2017, 09:13 AM | #15 |
Senior Member
Join Date: May 2010
Location: Southern Illinois
Posts: 3,795
|
Re: 1940 Ford Sedan (standard)
TAsh,
I have a '40 standard Tudor as well. You have a nice car, drive the hell out of it! |
03-27-2017, 09:16 AM | #16 |
Senior Member
Join Date: May 2010
Location: Coral Springs FL
Posts: 10,943
|
Re: 1940 Ford Sedan (standard)
TAshcraft: Thanks for posting those extra photos.
Beautiful car. "Standards" have an "agressive" look. I like the fact that it came with a roll of duct tape just in case a radiator hose bursts. Is that round shaped item under the dash a heater? For safety sake add a bolt on LED brake /taillight to the bumper brace if you don't install one in the rear fender. Having an original clock instead of the plain Standard glove box door is neat. Dual exhausts too. |
03-27-2017, 09:48 AM | #17 | |
Junior Member
Join Date: Aug 2012
Location: Arkansas
Posts: 15
|
Re: 1940 Ford Sedan (standard)
Quote:
Yes it is a heater, the switch is under the dash and a light comes on through it once it is on. Sent from my iPhone using Tapatalk |
|
03-27-2017, 10:47 AM | #18 |
Senior Member
Join Date: Jun 2012
Location: Gaylord, Michigan
Posts: 1,605
|
Re: 1940 Ford Sedan (standard)
BadAssTash.....very nice !
|
03-27-2017, 10:48 AM | #19 |
Senior Member
Join Date: Jun 2012
Location: Gaylord, Michigan
Posts: 1,605
|
Re: 1940 Ford Sedan (standard)
You can never have enough duck tape !
|
03-27-2017, 10:56 AM | #20 |
Senior Member
Join Date: May 2010
Location: Columbia, SC
Posts: 1,579
|
Re: 1940 Ford Sedan (standard)
FYI, the glove box door is from a '40 Deluxe.
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|