Go Back   The Ford Barn > General Discussion > Early V8 (1932-53)

Sponsored Links (Register now to hide all advertisements)

Closed Thread
 
Thread Tools Display Modes
Old 03-19-2018, 07:16 PM   #1
Titan12345
Junior Member
 
Join Date: May 2013
Posts: 1
Default 302/aod

Hello, just getting ready to install this combination in my 53F100. Can I install this and keep OEM cross members? I have seen other posts and cannot get a solid answer. I know I will have to add a transmission mount to fit the AOD.
Thanks
Titan12345 is offline  
Old 03-19-2018, 07:54 PM   #2
ford nut
Senior Member
 
ford nut's Avatar
 
Join Date: Aug 2013
Location: rosemead ca.
Posts: 323
Default Re: 302/aod

have you tried to install it yet? I have a 302/aod in my 56 f100 and I think the frame is the same. drop it in with both engine and trans together, it helps to have a leveler on you hoist if you're alone. also have a bunch of blocks of wood in different thickness around to set the whole thing on, I use 4x6 beam cut off about 10" long or so, then some 2x4's, 1x4", 1/2", 1/4" ply to make up your blocks. truck needs to be up in the air a bit so you can move things around and see how it's going, how things are clearing, engine angle. you might want to join the "ford truck enthusiast" site. that kind of thing is always going on over there.
ford nut is offline  
Sponsored Links (Register now to hide all advertisements)
Old 03-19-2018, 10:13 PM   #3
Ryan
Administrator
 
Ryan's Avatar
 
Join Date: Apr 2010
Location: Austin, TX
Posts: 573
Default Re: 302/aod

Hey man... try jalopyjournal.com for something like this.
__________________
Ryan Cochran*
- www.AtomicIndustry.com
Ryan is offline  
Closed Thread

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 12:38 AM.