|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
09-08-2016, 09:56 PM | #1 |
Senior Member
Join Date: May 2010
Location: Walla Walla, Washington
Posts: 182
|
Bushings For Distributor
The aluminum distributor in my "51 V/8 needs new upper and lower bushings. The two catalogs I have list only the lower. Called Mac Vanpelt and he is out of the upper bushing. Does anyone out there have any suggestions as to who I might contact to locate both upper and lower.
__________________
DD658 |
09-08-2016, 10:31 PM | #2 |
Member Emeritus
Join Date: Nov 2012
Location: Wichita KS
Posts: 16,132
|
Re: Bushings For Distributor
Babbas
|
Sponsored Links (Register now to hide all advertisements) |
|
09-09-2016, 10:14 PM | #3 |
Senior Member
Join Date: Jul 2014
Location: Iowa
Posts: 1,634
|
Re: Bushings For Distributor
At our shop we use stock bushings to fit the body, then size them to fit the shaft using our Sunnen piston pin hone machine.
|
09-10-2016, 09:10 AM | #4 |
Senior Member
Join Date: May 2010
Location: Michigan
Posts: 501
|
Re: Bushings For Distributor
Sponsored Links (Register now to hide all advertisements)
|
Thread Tools | |
Display Modes | |
|
|
Sponsored Links (Register now to hide all advertisements) |
|