The Ford Barn

Roger W Gerow · 03-28-2015, 03:09 PM

Which engine size would be in a 1950/51 Ford F5? 239 or 337 cubic inch.

Bob C · 03-28-2015, 03:22 PM

239

rotorwrench · 03-28-2015, 05:44 PM

The 337 was in the very big F-7 & F-8.

Roger W Gerow · 03-30-2015, 08:37 PM

Thanks for the info. Much appreciated. Was hoping it would be the 239.

Flathead · 03-31-2015, 12:34 PM

If the engine has been replaced in the past it could even be a Mercury, owners would sometimes do that for more power. It is a long shot though.

51504bat · 03-31-2015, 05:28 PM

Sponsored Links (Register now to hide all advertisements)

Distributor in front = 239. Distributor in back = 337.

03-28-2015, 03:09 PM	#1
Roger W Gerow Senior Member Join Date: May 2010 Location: Walla Walla, Washington Posts: 182	Engine Size Which engine size would be in a 1950/51 Ford F5? 239 or 337 cubic inch.

03-28-2015, 03:22 PM	#2
Bob C Senior Member Join Date: May 2010 Location: So Cal Posts: 8,747	Re: Engine Size 239

03-28-2015, 05:44 PM	#3
rotorwrench Senior Member Join Date: Jun 2010 Location: San Antonio, Texas Posts: 16,426	Re: Engine Size The 337 was in the very big F-7 & F-8.

03-30-2015, 08:37 PM	#4
Roger W Gerow Senior Member Join Date: May 2010 Location: Walla Walla, Washington Posts: 182	Re: Engine Size Thanks for the info. Much appreciated. Was hoping it would be the 239.

03-31-2015, 12:34 PM	#5
Flathead Senior Member Join Date: May 2010 Location: Southern Maine Posts: 1,498	Re: Engine Size If the engine has been replaced in the past it could even be a Mercury, owners would sometimes do that for more power. It is a long shot though.

03-31-2015, 05:28 PM	#6
51504bat Senior Member Join Date: Sep 2013 Location: SoCal-Redlands Posts: 3,014	Re: Engine Size Sponsored Links (Register now to hide all advertisements) Distributor in front = 239. Distributor in back = 337. __________________ Making the simple complicated for over 30 years.