The Ford Barn

jstrez5 · 04-02-2020, 06:05 PM

I am thinking of putting new window channels in my 39 4 door ford how hard of a job is it and are their any special tools i may need and who would be the best vender to purchase the channels from any help in this matter would surely be appreciated thank you. jim s.

TJ · 04-02-2020, 07:09 PM

Almost all the window channel kits are made by Vintique, Most vendors carry the Vintique brand. There is instructions with the kits and take notes as you remove the old channels, etc. Do one door at a time as it's easier.

marko39 · 04-03-2020, 09:02 AM

Sponsored Links (Register now to hide all advertisements)

These are not too hard to install. You screw them to the garnish mouldings and they fit in small clips on the body. You will need tin snips to trim them as they come longer than needed. On the garnish you can hold them in place using clothes pins as clamps. The are originally installed with staples on the mouldings.

04-02-2020, 06:05 PM	#1
jstrez5 Senior Member Join Date: Aug 2012 Location: PA Posts: 263	39 ford 4 door window channels I am thinking of putting new window channels in my 39 4 door ford how hard of a job is it and are their any special tools i may need and who would be the best vender to purchase the channels from any help in this matter would surely be appreciated thank you. jim s.

04-02-2020, 07:09 PM	#2
TJ Senior Member Join Date: May 2010 Location: Napa,California Posts: 6,029	Re: 39 ford 4 door window channels Almost all the window channel kits are made by Vintique, Most vendors carry the Vintique brand. There is instructions with the kits and take notes as you remove the old channels, etc. Do one door at a time as it's easier.

04-03-2020, 09:02 AM	#3
marko39 Senior Member Join Date: Oct 2016 Location: harpursville ny Posts: 1,040	Re: 39 ford 4 door window channels Sponsored Links (Register now to hide all advertisements) These are not too hard to install. You screw them to the garnish mouldings and they fit in small clips on the body. You will need tin snips to trim them as they come longer than needed. On the garnish you can hold them in place using clothes pins as clamps. The are originally installed with staples on the mouldings.