The Ford Barn

ba49 · 11-09-2012, 01:55 PM

I have a 30 coupe and when I bought it it didn't have the 12 bolts in the floorboards. Can anybody tell me what size they are? I know they have a cup under the head but what is the size and length of the bolt? The head in the picture looks like an oval head. Thanks.

700rpm · 11-09-2012, 03:16 PM

They're flathead machine screws with dished washers and fit into the D-nuts in the body. Correct and complete sets, with washers, are readily available from A parts suppliers for a reasonable price.

Charlie Stephens · 11-09-2012, 03:26 PM

I agree with Ray. If I remember correctly they are a slightly different size than the common sizes from the hardware store and you will ruin all of your D nuts if you use the wrong size.

Charlie Stephens

MAG · 11-09-2012, 03:31 PM

Can anybody tell me what size they are? I know they have a cup under the head but what is the size and length of the bolt?

12/24 X 1 1/4 flat head

P.S. · 11-09-2012, 04:54 PM

12-24 flathead. www.vintageford.com has them in stock.

ba49 · 11-09-2012, 10:10 PM

Sponsored Links (Register now to hide all advertisements)

thank you guys

11-09-2012, 01:55 PM	#1
ba49 Senior Member Join Date: Jun 2012 Location: Sheffield Lake, Ohio Posts: 137	Floor bolt question. I have a 30 coupe and when I bought it it didn't have the 12 bolts in the floorboards. Can anybody tell me what size they are? I know they have a cup under the head but what is the size and length of the bolt? The head in the picture looks like an oval head. Thanks.

11-09-2012, 03:16 PM	#2
700rpm Senior Member Join Date: May 2010 Location: Portland, Oregon Posts: 5,903	Re: Floor bolt question. They're flathead machine screws with dished washers and fit into the D-nuts in the body. Correct and complete sets, with washers, are readily available from A parts suppliers for a reasonable price. __________________ Ray Horton, Portland, OR As you go through life, keep your eye on the donut, not the hole.

11-09-2012, 03:26 PM	#3
Charlie Stephens Senior Member Join Date: May 2010 Location: Southern California Posts: 7,031	Re: Floor bolt question. I agree with Ray. If I remember correctly they are a slightly different size than the common sizes from the hardware store and you will ruin all of your D nuts if you use the wrong size. Charlie Stephens

11-09-2012, 03:31 PM	#4
MAG Senior Member Join Date: May 2010 Location: Austin, Texas Posts: 925	Re: Floor bolt question. Can anybody tell me what size they are? I know they have a cup under the head but what is the size and length of the bolt? 12/24 X 1 1/4 flat head __________________ I noticed the harder I work the luckier I get!

11-09-2012, 04:54 PM	#5
P.S. Senior Member Join Date: Jul 2012 Location: California Posts: 1,695	Re: Floor bolt question. 12-24 flathead. www.vintageford.com has them in stock.

11-09-2012, 10:10 PM	#6
ba49 Senior Member Join Date: Jun 2012 Location: Sheffield Lake, Ohio Posts: 137	Re: Floor bolt question. Sponsored Links (Register now to hide all advertisements) thank you guys