|
|||||||
| Sponsored Links (Register now to hide all advertisements) |
|
|
 |
|
Thread Tools | Display Modes |
04-09-2018, 08:42 PM
|
#1 |
|
Senior Member
Join Date: May 2010
Location: Lakewood, CA
Posts: 1,344
|
What is the dimention of the rear body block on a 29 tudor?
Does anyone have the dimension of the rear body blocks on a 29 tudor.
I need to know the height (from frame to under side of body). I'm thinking it is around 1 and 1/2 inches high. LWH would be nice too? Thanks, Neil Last edited by Neil Mylar LakewoodCA; 04-09-2018 at 08:48 PM. Reason: Spell check |
|
|
|
04-10-2018, 05:51 PM
|
#2 |
|
Senior Member
Join Date: May 2010
Posts: 1,640
|
Re: What is the dimention of the rear body block on a 29 tudor?
Neil, here's some dimension labelled pictures of the blocks I took a few years ago when somewhat else needed the info:
- |
|
|
|
| Sponsored Links (Register now to hide all advertisements) |
|
|
|
04-10-2018, 07:20 PM
|
#3 |
|
Member
Join Date: Dec 2017
Location: Fenton Michigan
Posts: 43
|
Re: What is the dimention of the rear body block on a 29 tudor?
Those are good dimensions for the original 1929 blocks.
According to the service bulletins, July-August page 577 the length was increased to 6 inches, from 3 inches, with the angled cut portion increased to 4 1/8 from 1 1/4. |
|
|
|
|
04-11-2018, 12:36 AM
|
#4 |
|
Senior Member
Join Date: May 2010
Location: Lakewood, CA
Posts: 1,344
|
Re: What is the dimention of the rear body block on a 29 tudor?
Sponsored Links (Register now to hide all advertisements)
|
|
|
|
|
«
Previous Thread
|
Next Thread
»
| Thread Tools | |
| Display Modes | |
Linear Mode
|
|
| Sponsored Links (Register now to hide all advertisements) |
|
|
All times are GMT -5. The time now is 03:45 AM.