Go Back   The Ford Barn > General Discussion > Model A (1928-31)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 03-26-2018, 11:00 AM   #1
hazelhoff
Senior Member
 
Join Date: Dec 2013
Location: The Netherlands
Posts: 230
Default Shut off thread

I had to rebuild the lower part of my gas tank. Thougt I welded the right nut in to accomodate a new shut off valve. Since Murphy is living living upstairs, obviously a repo fuel valve does not fit.

I somehow retreived the right thread size in the past, but lost the little yellow paper on the way. murphy will find it when the job is closed I guess ...

For once and for all, what in earth is the CORRECT thread for a 28/29 to connect to the tank ? Remember, from what I remember from welding in this 'nut', I found it at a Caterpillar dealer, out of the old stock, being served by an elderly gentleman who took some two hours to fnd it. Proud he was succeding !

Please help me out here ....

Henk
hazelhoff is offline   Reply With Quote
Old 03-26-2018, 11:26 AM   #2
Y-Blockhead
Senior Member
 
Y-Blockhead's Avatar
 
Join Date: Jul 2011
Location: Redondo Beach, CA
Posts: 3,780
Default Re: Shut off thread

1/4"- pipe thread. Use a 1/4"-18 NPT Pipe Tap
__________________
Y-Blockhead
'30 Briggs Town Sedan
'55 Ford Ranchwagon
_________________________________
And once again that is just my 1 worth.
Y-Blockhead is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 03-26-2018, 12:15 PM   #3
hazelhoff
Senior Member
 
Join Date: Dec 2013
Location: The Netherlands
Posts: 230
Default Re: Shut off thread

Quote:
Originally Posted by Y-Blockhead View Post
1/4"- pipe thread. Use a 1/4"-18 NPT Pipe Tap
Ok,

Do you know why the repos are 5/8 straight thread ? Even with bert's ?

Thx,

Henk
hazelhoff is offline   Reply With Quote
Old 03-26-2018, 12:41 PM   #4
hazelhoff
Senior Member
 
Join Date: Dec 2013
Location: The Netherlands
Posts: 230
Default Re: Shut off thread

I am sorry, I mean the repos are 1/2 " npt aren't they ?
1/4 " is quite small ....
hazelhoff is offline   Reply With Quote
Old 03-26-2018, 12:47 PM   #5
1930-Pickup
Senior Member
 
Join Date: Mar 2017
Posts: 528
Default Re: Shut off thread

Pipe thread size is NOT the actual size. Google this or you will be even more confused.
1930-Pickup is offline   Reply With Quote
Old 03-26-2018, 02:00 PM   #6
Y-Blockhead
Senior Member
 
Y-Blockhead's Avatar
 
Join Date: Jul 2011
Location: Redondo Beach, CA
Posts: 3,780
Default Re: Shut off thread

Quote:
Originally Posted by 1930-Pickup View Post
Pipe thread size is NOT the actual size. Google this or you will be even more confused.
Boy isn't that the truth.

Quote:
Originally Posted by hazelhoff View Post
I am sorry, I mean the repos are 1/2 " npt aren't they ?
1/4 " is quite small ....
Just for a backup I re-checked. This direct from Bratton's...

Solid BRASS with original style stamped handle. This is a quality U.S. made valve. Gas valve threads in tank are 1/4" pipe thread. When the handle is vertical the gas is flowing. For 1928 to May 1931 with valve under tank. Won't leak; 3 year warranty.
__________________
Y-Blockhead
'30 Briggs Town Sedan
'55 Ford Ranchwagon
_________________________________
And once again that is just my 1 worth.
Y-Blockhead is offline   Reply With Quote
Old 03-26-2018, 02:11 PM   #7
Y-Blockhead
Senior Member
 
Y-Blockhead's Avatar
 
Join Date: Jul 2011
Location: Redondo Beach, CA
Posts: 3,780
Default Re: Shut off thread

Quote:
Originally Posted by hazelhoff View Post
I am sorry, I mean the repos are 1/2 " npt aren't they ?
1/4 " is quite small ....
I just went out to the garage. The threads on a NPT tap is ~.845", almost ⅞" in diameter.
__________________
Y-Blockhead
'30 Briggs Town Sedan
'55 Ford Ranchwagon
_________________________________
And once again that is just my 1 worth.

Last edited by Y-Blockhead; 03-26-2018 at 11:21 PM.
Y-Blockhead is offline   Reply With Quote
Old 03-26-2018, 07:58 PM   #8
Spokes
Senior Member
 
Join Date: Feb 2013
Location: Monterey Peninsula,California
Posts: 188
Default Re: Shut off thread

Years Ago I Had A Gas Tank With A Lot Of Crud In The Tank. After Washing The Tank Out Several Times. I Ran A 1/4 x 18 ? Short Pipe In The Tank Approximately 1/4 Inch Above The Inside Bottom Of The Tank. I Then Put A Fitting On The Bottom Of Tank For Shut Of Valve. That Worked Great. Please Dry Fit This My Memory Maybe Off A Little lol
Spokes is offline   Reply With Quote
Old 03-26-2018, 10:50 PM   #9
kenparker
Senior Member
 
kenparker's Avatar
 
Join Date: May 2010
Location: Van, Texas
Posts: 988
Default Re: Shut off thread

Have not read the catalogs from Snyders, Brattons or Berts as to what the gas tank threads are, but I just measured a 1928 CCPU gas tank and a 1930 Coupe gas tank shut off valve thread.. i measure1/4" pipe thread and a 1/4" pipe fitting screw into the shut Off boss in the bottom of the tanks.
kenparker is offline   Reply With Quote
Old 03-27-2018, 07:24 AM   #10
Mike Peters
Senior Member
 
Mike Peters's Avatar
 
Join Date: Aug 2012
Location: South East Wisconsin
Posts: 545
Default Re: Shut off thread

Join Date: May 2010
Location: Van, Texas
Posts: 922
Default Re: Shut off thread
Have not read the catalogs from Snyders, Brattons or Berts as to what the gas tank threads are, but I just measured a 1928 CCPU gas tank and a 1930 Coupe gas tank shut off valve thread.. i measure1/4" pipe thread and a 1/4" pipe fitting screw into the shut Off boss in the bottom of the tanks.

Agree....I'm working on a 29 tank right now. It's 1/4" pipe thread. Pipe threads are a different animal from bolt and nut threads. Do not confuse the two types of threads.
Mike Peters is offline   Reply With Quote
Old 03-27-2018, 03:32 PM   #11
BILL WILLIAMSON
Senior Member
 
BILL WILLIAMSON's Avatar
 
Join Date: Dec 2010
Location: FRESNO, CA
Posts: 12,551
Default Re: Shut off thread

And remember, there are MALE & FEMALE threads! Common sense will tell you which is which---LOL---Do you have KIDS?---When sumbody ask my Single Son that, he'd say, "NOT THAT I KNOW ABOUT"--LOL
Bill "Funnie"?
__________________
"THE ASSISTANT GURU OF STUFF"
BILL WILLIAMSON is offline   Reply With Quote
Old 03-27-2018, 05:31 PM   #12
father-son
Junior Member
 
Join Date: Aug 2016
Location: Kennesaw, GA
Posts: 14
Default Re: Shut off thread

NPT (Model A shut-off valve-male end) vs. NPTF Taper Pipe Threads

The two most common taper pipe threads used in the United States are NPT (Model A shutoff male end) and NPTF. Applications range from electrical conduits and hand railings to high-pressure pipe lines that carry gas or caustic fluids.

NPT threads are for mechanical or low-pressure air or fluid applications and require the use of sealing compounds like Teflon tape, to provide the seal. When the application is more critical, and the sealing compound may fail due to high heat or pressure, NPTF Dryseal threads are used.

Visually, both threads appear to be identical. Both have a taper over one foot of length. Both have the same pitch diameter at the top of the hole of internal threads or end of the pipe on external threads, and both have the same thread lengths or depths. However, there is a subtle difference in the thread form that differentiates the two. The major and minor diameters of both threads differ slightly.

With NPT threads, after a wrench is applied, slight spaces at the major and minor diameters may exist that would allow the assembly to leak and therefore a sealing compound is used to fill any gaps.

On the other hand, NPTF threads are designed to ensure that sufficient crushing of the entire thread form will take place to produce a mechanical seal.
father-son is offline   Reply With Quote
Old 03-27-2018, 06:05 PM   #13
Bob C
Senior Member
 
Join Date: May 2010
Location: So Cal
Posts: 6,244
Default Re: Shut off thread

The OD of 1/4" pipe is .540"

Bob
Bob C is offline   Reply With Quote
Old 03-27-2018, 08:38 PM   #14
Ruth
Senior Member
 
Join Date: May 2016
Location: Glide, Oregon
Posts: 239
Default Re: Shut off thread

I hope the OP got his answer now, from the 2nd post on. LOL
Ruth is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 05:04 AM.