very front body mounting rubber block?

[Dennisford]

I am building a 1930 huckster and was wondering about the body mounting block for hole #1 between the cowl and frame. should it be wood and rubber , or just wood or just all rubber? any help would be appreciated.thanks

[Mitch//pa]

it takes rubber and they can be stacked to adjust the hood and body alignment

[Dennisford]

Thanks a lot appreciate it.

[Tom Wesenberg]

My 28 Phaeton and 29 Tudor has a wood block with a fabric reinforced rubber pad nailed to the bottom of the wood block. To this you can add more rubber pads for shimming if needed.

[2manycars]

The 28-29 bodies have a wooden block attached to the body, with a rubber pad under that. The 30-31 bodies do not have the wooden block, and just the rubber pad.

[Tom Wesenberg]

Sponsored Links (Register now to hide all advertisements)

Originally Posted by 2manycars

The 28-29 bodies have a wooden block attached to the body, with a rubber pad under that. The 30-31 bodies do not have the wooden block, and just the rubber pad.

Thanks for that. I was unaware of that change.