1934 upper radiator hoses

[epw1949]

I am putting a 59 type engine in a 34 car using the 34 radiator.i know that several thousand people have done this before.my question is,does any one make a upper radiator hose to fit,or what has others done to make this plumbing look decent? Any and all help will be greatly appreciated. Thanks e.p.w.

[JSeery]

Do you already have the radiator? When I had my radiator made I had them bring the inlets straight back so that is easier to plumb to the heads.

[epw1949]

JSeery,yes I do,its the original reconditioned.That was a great idea.Thanks E.P.W.

[JSeery]

Well, you are going to have to go with the "S" configuration. LOL

[epw1949]

Btt

[Deuce Bob]

Sponsored Links (Register now to hide all advertisements)

Hi I used a Carquest hose #23040 its made by Gates. It is an S shaped hose I cut to fit and worked out great. send me your E-mail and I can send you a picture. Bob

[JSeery]

I can add a couple.

[JSeery]

Another one.

[jimTN]

You can take a stock 37 hose, cut it in the center, turn one end and insert a pipe between the two cut ends and it fits like it was made for it.