|
02-05-2019, 09:09 PM | #1 |
Junior Member
Join Date: Jul 2010
Posts: 27
|
30w oil
was told the other day that one of the fellas was using 30w diesel oil in his car any pros or cons from what i read it has different detergents
|
02-05-2019, 09:31 PM | #2 |
Junior Member
Join Date: Dec 2017
Location: Painesville, OH
Posts: 22
|
Re: 30w oil
I use Shell Rotella 30W diesel oil; the previousowner mentioned that the zinc in the oil helps with the babbit bearings.
__________________
"Our times are characterized by a perfection of means and a confusion of ends." - A. Einstein |
Sponsored Links (Register now to hide all advertisements) |
|
02-06-2019, 12:59 AM | #3 |
Senior Member
Join Date: May 2010
Location: now Kuna, Idaho
Posts: 3,779
|
Re: 30w oil
Zinc is a type of extreme pressure additive to prevent/reduce cam lobe/lifter wear in engines with high valve spring pressure. It had nothing to do with Babbitt bearings. Not needed there.
|
02-05-2019, 10:05 PM | #4 |
Junior Member
Join Date: Jan 2019
Posts: 2
|
Re: 30w oil
Don't think Rotella has zinc any more. Its a moot point in an A as zinc was not an additive when the Model A was new. Zinc was introduced for the high compression engines of the 50's and 60's
|
02-05-2019, 11:26 PM | #5 |
Senior Member
Join Date: Aug 2011
Location: Eagle Bend, MN
Posts: 2,025
|
Re: 30w oil
30W is fine for summer, I use 10W30 year around.
__________________
"There are some that can destroy an anvil with a teaspoon and shouldn't be allowed to touch anything resembling a tool." |
02-06-2019, 10:35 AM | #6 |
Senior Member
Join Date: Jun 2015
Location: Red Deer, Alberta
Posts: 5,043
|
Re: 30w oil
Sponsored Links (Register now to hide all advertisements)
__________________
If you don't hear a rumor by 10 AM, start one!. Got my education out behind the barn! |
02-06-2019, 03:36 PM | #7 |
Member
Join Date: Nov 2016
Location: Corrupt-A -Cut Eastern,Ct
Posts: 54
|
Re: 30w oil
Valvoline VR1 racing oil has zinc, get at NAQPA
|
02-06-2019, 03:43 PM | #8 |
Senior Member
Join Date: May 2010
Location: New Jersey
Posts: 734
|
Re: 30w oil
Hey Jynx, if you look for previous posts regarding motor oils you will find enough opinions to keep you busy for days. At the risk of being labeled a heretic I doubt that you could find a motor oil for automobiles that would not be adequate for a Model A.
|
02-06-2019, 04:10 PM | #9 | |
Senior Member
Join Date: Jun 2014
Location: Melbourne, Australia
Posts: 7,496
|
Re: 30w oil
Quote:
I use what ever oil is on special at the shops - usually 20W50. With a 180F thermostat, the engine temperatures are high enough that it does fine.
__________________
I'm part of the only ever generation with an analogue childhood and a digital adulthood. |
|
02-10-2019, 12:27 AM | #10 | ||
Senior Member
|
Re: 30w oil
Quote:
Quote:
You guys got that right! Use what every you want that will get you on the road.
__________________
What's right about America is that although we have a mess of problems, we have great capacity - intellect and resources - to do some thing about them. - Henry Ford II |
||
02-06-2019, 06:59 PM | #11 |
Senior Member
Join Date: May 2010
Location: Alabama
Posts: 8,099
|
Re: 30w oil
I use Walmart brand 20-W-50
|
02-07-2019, 11:37 AM | #12 |
Senior Member
Join Date: Sep 2017
Location: Mint Hill, North Carolina
Posts: 386
|
Re: 30w oil
Rotella oil is fine for a Model A
|
02-07-2019, 11:50 AM | #13 |
Senior Member
Join Date: May 2010
Location: PA Poconos
Posts: 723
|
Re: 30w oil
I agree with Synchro909. Oils today are so much better than in 1930 that anything would be better. We shouldn't get all wrapped around recommendations from 1930. They were fine for the technology of the day, but we've come a long way in lubrication!
As to viscosity, modern multi-viscosity oils mean you don't have to change oil between summer and winter. The chart posted by katy in post #6 shows the whole picture. I use 20W-50 myself in my old Fords and have never had a problem. 10W-40 would be fine also. |
02-07-2019, 03:05 PM | #14 |
Senior Member
Join Date: Jan 2019
Location: Germany, near Aachen
Posts: 1,156
|
Re: 30w oil
Hello.
I am not sure if I have understood the core question correctly. For vintage cars, a low viscosity can have the disadvantage that the shaft bearings leak leaking oil. Otherwise, a multi-grade oil is always better than a single range. The most important is the API classification. Because of the non-ferrous metal compatibility. You should not go higher than "SC". Petrol engine oil API SC has anti-corrosion inhibitor, detergent cleaner, HD heavy duty additives. That is enough! However, the oil still has to be changed many times (max. <1000 miles) because it runs without a filter and only then can the abrasion chips be taken out.
__________________
Beste Gruesse aus Deutschland, Werner Ford Model A, Roadster, 1928 Citroen 11 CV, 1947 Hercules W 2000, 1976; (with NSU-Wankel Rotary Engine), Canadian version |
02-07-2019, 08:20 PM | #15 | |
Senior Member
Join Date: Aug 2018
Posts: 2,332
|
Re: 30w oil
Quote:
From what I have read, not an expert. One major reason for using multi grade oil is a large portion of wear occurs during motor warm up until the oil/motor is at operating temperature. Straight 30 weight thickens considerably at colder/cooler temps. A multi-grade like 10w30 will thicken to what a straight 10 grade oil thickens to at a cold temperature. A lot of motors when the temp in late fall/early spring/winter do not warm up all the way unless using a thermostat or if partially blocking the radiator. So the straight weight 30 oil is thicker than ideal all at all times. Use of a magnetic oil plug can catch quite a bit of the metallic bits that might be floating around in the oil, but if you are especially concerned about this the motor can be converted to an oil filter system. The figure most mentioned here is changing oil every 500 miles. Oil is cheap compared to chances of premature motor wear. |
|
02-10-2019, 01:54 PM | #16 | |
Senior Member
Join Date: Aug 2015
Location: Southern Alberta
Posts: 582
|
Re: 30w oil
Quote:
|
|
02-09-2019, 12:20 PM | #17 |
Senior Member
Join Date: May 2010
Location: Alabama
Posts: 8,099
|
Re: 30w oil
The model A engine needs a certain amount of viscosity to cushion the bearings . Ford recommended 20w for winter and 40 w for summer . I use multi grade oil , but figure that a 10w whatever would be too thin to give the necessary viscosity for the older engines when warm . There is more to it than quick flow , in my opinion .
|
02-14-2019, 01:38 PM | #18 |
Senior Member
Join Date: Oct 2012
Location: Whangarei, New Zealand
Posts: 298
|
Re: 30w oil
Wear happens with cold, thick oil.
At no point in normal operation will a 0W-40 get thinner than the SAE40 - they are both the same viscosity when hot, which is when they are the thinnest. They BOTH thicken as they cool. A 0W-40 works better than a SAE40, because it thickens less when cold - they're both as thin as each other when hot though. The difference is that the 0W will flow better cold, giving the best of both worlds. It's a somewhat moot point though - not too many people are going to pay for 0W-40 and dump it every 1000 miles though! Ours usually runs a 15W-40, more for cost/availability than anything. How many model A owners even drive enough miles for the oil to impact the engine longevity anyway???
__________________
Allan '29 Tudor, Canadian RHD Whangarei, NZ "Duct Tape can't fix stupid, but it can MUFFLE the sound" |
02-14-2019, 01:47 PM | #19 | |
Senior Member
Join Date: Aug 2018
Posts: 2,332
|
Re: 30w oil
Quote:
x2 - You did a much better job of describing what I was trying to say. |
|
02-14-2019, 01:49 PM | #20 | |
Senior Member
Join Date: Apr 2013
Location: Northwest CT
Posts: 1,092
|
Re: 30w oil
Quote:
If they both flow like SAE 30 when hot (which they should), why would oil consumption change? |
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|