|
|||||||
| Sponsored Links (Register now to hide all advertisements) |
|
|
 |
|
Thread Tools | Display Modes |
01-25-2022, 12:05 PM
|
#1 |
|
Senior Member
Join Date: May 2010
Location: Plano, Texas
Posts: 840
|
right side open car stanchion mirror
The stainless stanchion on the right side on a 30-31 roadster has no mounting hole for a mirror, and I would like to drill and add a mirror just like the one on the drivers side. To do this the back SS cover plate needs to be removed to attach a nut to the mirror, but I'm not sure how the best way to remove that cover. I'm sure this has been done many times, so any suggestions on best way to do this. Thanks, John
|
|
|
|
01-25-2022, 12:50 PM
|
#2 |
|
Senior Member
Join Date: Jun 2015
Location: Red Deer, Alberta
Posts: 5,042
|
Re: right side open car stanchion mirror
How about using a "rivnut", they can be installed w/out the special tool.
https://www.amazon.com/s?k=rivnut&ref=nb_sb_noss
__________________
If you don't hear a rumor by 10 AM, start one!. Got my education out behind the barn! |
|
|
|
| Sponsored Links (Register now to hide all advertisements) |
|
|
|
01-25-2022, 02:40 PM
|
#3 |
|
Senior Member
Join Date: Mar 2014
Location: Columbus(Cataula) Georgia
Posts: 849
|
Re: right side open car stanchion mirror
Sponsored Links (Register now to hide all advertisements)
__________________
Henry' s 31 |
|
|
|
|
«
Previous Thread
|
Next Thread
»
| Thread Tools | |
| Display Modes | |
Linear Mode
|
|
| Sponsored Links (Register now to hide all advertisements) |
|
|
All times are GMT -5. The time now is 06:40 PM.