|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
09-01-2014, 05:09 PM | #1 |
Senior Member
Join Date: Jun 2010
Posts: 157
|
flat head motor id
i know google is my friend also the archives but still have a problem iding this flatty. engine has the cast bell housing but the fuel pump rod is the 10 ich long one which is for a 49 -53 right? i thought 48 was last year for the cast bell housing. no markings on the housing just on right rear of block is something than L 431 has eab heads on it. can someone help here? thanks
|
09-01-2014, 05:28 PM | #2 |
Senior Member
Join Date: May 2010
Location: South Texas
Posts: 1,631
|
Re: flat head motor id
Please post a picture of the engine. Not all engines meet the rules of normal USA production blocks. If you get an engine made in another part of the world, things can get very odd for the uninitiated. It sounds like you may have a French V8, or some other non-USA engine.
|
Sponsored Links (Register now to hide all advertisements) |
|
09-01-2014, 05:51 PM | #3 |
Senior Member
Join Date: Jun 2010
Posts: 157
|
Re: flat head motor id
yeah id like to post a pic but dont own one of those fancy phones.
|
09-01-2014, 06:27 PM | #4 |
Senior Member
Join Date: May 2010
Location: Chester Vt
Posts: 8,857
|
Re: flat head motor id
Bruce Lancaster can probably answer that question better tham I. However, Ford did allot of crazy things in 1948/9. In an effort to keep production going during the change over. No telling what they did or why.
|
09-02-2014, 07:29 PM | #5 |
Senior Member
Join Date: Jun 2010
Posts: 157
|
Re: flat head motor id
pulled the intake found these letters and numbers on rear ledge inside 1ba -w does that help any thanks
|
09-03-2014, 10:26 AM | #6 |
Member Emeritus
Join Date: May 2010
Location: Madison, NJ
Posts: 5,230
|
Re: flat head motor id
Sponsored Links (Register now to hide all advertisements)
Go out and stop the next teenager you see...those guys know how to make pictures and put them here! |
09-03-2014, 11:03 AM | #7 |
Senior Member
Join Date: Jun 2010
Posts: 157
|
Re: flat head motor id
found numbers on the mounting ledge for the intake today under a lot of paint. 3 1 P than a 3 in a box.does that help?
|
09-03-2014, 12:24 PM | #8 |
Senior Member
Join Date: May 2010
Location: Oshkosh, Wi
Posts: 4,526
|
Re: flat head motor id
I think if you look closely, you'll find that that bellhousing is actually a bolted on item. As said, 1BA notes a 1951 engine.
|
09-03-2014, 09:42 PM | #9 |
Senior Member
Join Date: May 2010
Location: South Texas
Posts: 1,631
|
Re: flat head motor id
Check this thread for USA block information (and a decent dose of Canadian & European block info too): https://www.fordbarn.com/forum/showth...5301&showall=1
And please post a picture of your engine. |
09-04-2014, 09:22 AM | #10 |
Senior Member
Join Date: Jul 2010
Location: Conifer, Colorado
Posts: 2,423
|
Re: flat head motor id
Interesting site: http://flatheaddrag.com/birthday.html
|
09-04-2014, 11:18 AM | #11 |
Senior Member
Join Date: Jun 2010
Posts: 157
|
Re: flat head motor id
if i ever find a camera phone or digital camera i can borrow i send shots.
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|