|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
04-07-2018, 01:19 AM | #11 |
Senior Member
Join Date: May 2010
Location: Mpls, MN
Posts: 27,582
|
Re: Chasing the knock.
When the pin drops into the cam gear dimple, the rotor should be exactly as in this picture.
I'd loose the rubber fuel line, and run steel all the way. The points should be adjusted to .020". |
|
|
Sponsored Links (Register now to hide all advertisements) |
|