The Ford Barn

Don Cape Cod · 07-14-2010, 11:36 PM

Is there anyone around who might have a few parts or, yes, a lot of parts? I'm trying to find a round Rochester dial face, no trip type, and a Waltham part. What should be a matching square hole for the square end of the speedo cable ends up being worn round. The gear itself, as the rest of the unit works fine. I just need this item that threads into the back of this oval unit.
Thanks, Don

A-Jay · 07-17-2010, 07:08 AM

Don, Not sure if this what your looking for but anyway, There is a guy who advertises in our news letter who is a speedo repair guy. no name of person, in Wichita, KS Brattons and other sell some of the common speedo stuff but when you have the one off type, you have to dig a little.
www.cushmanspeedometer.com
[email protected]

Don Cape Cod · 07-21-2010, 09:57 PM

Thanks A-Jay, I tried cushman but he does not handle Waltham's and will not sell any parts.

Ron in Quincy · 07-21-2010, 10:19 PM

Don Cape Cod,

Don,

Give Al Lepore (A&L Parts) a call; if he can't help you he may know someone who can help you.

860-693-0112 ( Box 301, Canton, Conn. 06019)

Ron

ford1 · 07-22-2010, 12:33 AM

put grease on the end of speedo cable fill the speedo hole with jb weld then push the square end of the cable in the jb weld and let it set up the grease will let the cable slip out, if nervouse leave the cable end in the jb weld just long enough to set up a little then remove the cable

Don Cape Cod · 07-22-2010, 09:46 AM

Sponsored Links (Register now to hide all advertisements)

Hi ford 1, Funny, but I had been contemplating that. I have not put magnifier glass to it yet. Looks kind of smooth inside for JB to grasp. I'll hope to find a part in the meantime as this is not a "hurry up" need

07-14-2010, 11:36 PM	#1
Don Cape Cod Senior Member Join Date: May 2010 Posts: 114	Speedometer parts ? Is there anyone around who might have a few parts or, yes, a lot of parts? I'm trying to find a round Rochester dial face, no trip type, and a Waltham part. What should be a matching square hole for the square end of the speedo cable ends up being worn round. The gear itself, as the rest of the unit works fine. I just need this item that threads into the back of this oval unit. Thanks, Don

07-17-2010, 07:08 AM	#2
A-Jay Senior Member Join Date: May 2010 Location: Fairfax, Va. Posts: 127	Re: Speedometer parts ? Don, Not sure if this what your looking for but anyway, There is a guy who advertises in our news letter who is a speedo repair guy. no name of person, in Wichita, KS Brattons and other sell some of the common speedo stuff but when you have the one off type, you have to dig a little. www.cushmanspeedometer.com [email protected]

07-21-2010, 09:57 PM	#3
Don Cape Cod Senior Member Join Date: May 2010 Posts: 114	Re: Speedometer parts ? Thanks A-Jay, I tried cushman but he does not handle Waltham's and will not sell any parts.

07-21-2010, 10:19 PM	#4
Ron in Quincy Senior Member Join Date: May 2010 Location: Quincy, CA. Posts: 1,708	Re: Speedometer parts ? Don Cape Cod, Don, Give Al Lepore (A&L Parts) a call; if he can't help you he may know someone who can help you. 860-693-0112 ( Box 301, Canton, Conn. 06019) Ron

07-22-2010, 12:33 AM	#5
ford1 Senior Member Join Date: May 2010 Location: oroville ca. Posts: 1,554	Re: Speedometer parts ? put grease on the end of speedo cable fill the speedo hole with jb weld then push the square end of the cable in the jb weld and let it set up the grease will let the cable slip out, if nervouse leave the cable end in the jb weld just long enough to set up a little then remove the cable

07-22-2010, 09:46 AM	#6
Don Cape Cod Senior Member Join Date: May 2010 Posts: 114	Re: Speedometer parts ? Sponsored Links (Register now to hide all advertisements) Hi ford 1, Funny, but I had been contemplating that. I have not put magnifier glass to it yet. Looks kind of smooth inside for JB to grasp. I'll hope to find a part in the meantime as this is not a "hurry up" need