The Ford Barn

John Kuhnast · 06-26-2015, 12:45 PM

The pin fell out of my control rod arm for the timing rod to the distributer. Two of us were unable to compress the spring and put the control arm on and at the same time put a pin in. Im looking for a trick to doing this. Thanks John

Bob C · 06-26-2015, 01:22 PM

Sponsored Links (Register now to hide all advertisements)

See post #3 in this thread. https://www.fordbarn.com/forum/showth...ight=vise-grip

Bob

06-26-2015, 12:45 PM	#1
John Kuhnast Senior Member Join Date: May 2010 Posts: 564	control rod arm ? The pin fell out of my control rod arm for the timing rod to the distributer. Two of us were unable to compress the spring and put the control arm on and at the same time put a pin in. Im looking for a trick to doing this. Thanks John

06-26-2015, 01:22 PM	#2
Bob C Senior Member Join Date: May 2010 Location: So Cal Posts: 8,753	Re: control rod arm ? Sponsored Links (Register now to hide all advertisements) See post #3 in this thread. https://www.fordbarn.com/forum/showth...ight=vise-grip Bob