Go Back   The Ford Barn > General Discussion > Model A (1928-31)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 03-25-2018, 10:53 PM   #1
quickchange
Senior Member
 
quickchange's Avatar
 
Join Date: May 2010
Location: Nelson. New Zealand
Posts: 2,007
Default Quickchange rear end

Anyone requiring a new Kiwi Model A quickchange rear, Due too cancelation I can bring one too Portland swap meet, or Bakersfield swap meet, or deliver possibly in between , leaving here in a few days , Also looking for a nice 4 door Model A on above route , must be original & will go too a great home ,Pos should list under wanted & Forsale but also its a service so , delete me if not acceptable here, We are also interested in calling in on folk on our trip down , interested in Model A stuff, & looking at other folks collection, will have a U haul if we can be of help too, Derek & Paul aka the southern pickers with little monies ??? Thanks.
quickchange is offline   Reply With Quote
Old 03-26-2018, 12:28 AM   #2
hardtimes
Senior Member
 
hardtimes's Avatar
 
Join Date: May 2010
Location: South California
Posts: 6,188
Default Re: Quickchange rear end

Quote:
Originally Posted by quickchange View Post
Anyone requiring a new Kiwi Model A quickchange rear, Due too cancelation I can bring one too Portland swap meet, or Bakersfield swap meet, or deliver possibly in between , leaving here in a few days , Also looking for a nice 4 door Model A on above route , must be original & will go too a great home ,Pos should list under wanted & Forsale but also its a service so , delete me if not acceptable here, We are also interested in calling in on folk on our trip down , interested in Model A stuff, & looking at other folks collection, will have a U haul if we can be of help too, Derek & Paul aka the southern pickers with little monies ??? Thanks.


I thought that you told me that you were not making A and V8 quickchange rears anymore ?
hardtimes is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 03-26-2018, 02:45 AM   #3
quickchange
Senior Member
 
quickchange's Avatar
 
Join Date: May 2010
Location: Nelson. New Zealand
Posts: 2,007
Default Re: Quickchange rear end

The patterns & gear are up forsale , Negations are underway for them , but not confirmed, meantime we managed to get a run of A ones done before machine shop closes , most of which have been reserved, ( couple left ) was to deliver one over there next week but buyers wife pulled the plug on him ,( suggested he make a quickchange ) so thought could offer here & save the buyer some freight , Winter is coming down under,
quickchange is offline   Reply With Quote
Old 03-26-2018, 04:03 AM   #4
waxhead
Senior Member
 
waxhead's Avatar
 
Join Date: Apr 2013
Location: West Australia
Posts: 346
Default Re: Quickchange rear end

Derek,

Sent you a PM
waxhead is offline   Reply With Quote
Old 03-26-2018, 04:17 AM   #5
quickchange
Senior Member
 
quickchange's Avatar
 
Join Date: May 2010
Location: Nelson. New Zealand
Posts: 2,007
Default Re: Quickchange rear end

replied ,mail me direct for more info Thanks
quickchange is offline   Reply With Quote
Old 03-26-2018, 01:56 PM   #6
midgetracer
Senior Member
 
midgetracer's Avatar
 
Join Date: May 2010
Location: Bismarck ND
Posts: 1,189
Default Re: Quickchange rear end

Sponsored Links (Register now to hide all advertisements)
Derek,
Do you have a space at Portland? I have one of your A quickchanges, and I will be at Portland. Would like to say hi.
Rod in North Dakota.
midgetracer is offline   Reply With Quote
Old 03-26-2018, 02:20 PM   #7
Vern
Senior Member
 
Vern's Avatar
 
Join Date: May 2010
Posts: 572
Default Re: Quickchange rear end

Was sorry to not see you this year at the Big 3 Swap, Derek.
Maybe next year!
Too bad they aren't looking for a Victoria project, we could probably swing a deal.
Have a safe trip.
Vern is offline   Reply With Quote
Old 03-26-2018, 02:32 PM   #8
quickchange
Senior Member
 
quickchange's Avatar
 
Join Date: May 2010
Location: Nelson. New Zealand
Posts: 2,007
Default Re: Quickchange rear end

Rod yes have a space however until I check with Paul not sure of number, But it will have a U Haul truck parked on it . Like to catch up too, Regards Derek
quickchange is offline   Reply With Quote
Old 03-26-2018, 02:34 PM   #9
quickchange
Senior Member
 
quickchange's Avatar
 
Join Date: May 2010
Location: Nelson. New Zealand
Posts: 2,007
Default Re: Quickchange rear end

Vern ill rely message to Paul , He wants a 30-31 4dr for his collection , Re big 3 can,t do them all age & $$$,s catching up BUT is planned for next feb one , june MAFCA meet in sparks , August Bonneville, Regards Derek
quickchange is offline   Reply With Quote
Old 03-27-2018, 02:30 AM   #10
model.a.paul
Junior Member
 
model.a.paul's Avatar
 
Join Date: Feb 2011
Location: New Zealand
Posts: 9
Default Re: Quickchange rear end

Quote:
Originally Posted by quickchange View Post
Rod yes have a space however until I check with Paul not sure of number, But it will have a U Haul truck parked on it . Like to catch up too, Regards Derek
PIR Swap site #2414, Portland Swap site #6249 (we hope). Paul
model.a.paul is offline   Reply With Quote
Old 03-27-2018, 01:29 PM   #11
hardtimes
Senior Member
 
hardtimes's Avatar
 
Join Date: May 2010
Location: South California
Posts: 6,188
Smile Re: Quickchange rear end

Quote:
Originally Posted by quickchange View Post
The patterns & gear are up forsale , Negations are underway for them , but not confirmed, meantime we managed to get a run of A ones done before machine shop closes , most of which have been reserved, ( couple left ) was to deliver one over there next week but buyers wife pulled the plug on him ,( suggested he make a quickchange ) so thought could offer here & save the buyer some freight , Winter is coming down under,


Ok, so same price to bring over to Chatsworth Boys Home swap as last one ?


Also, to confirm....no V8s at all for sale ?


Do you have any gear sets that you will not be using ?
hardtimes is offline   Reply With Quote
Old 03-27-2018, 01:44 PM   #12
quickchange
Senior Member
 
quickchange's Avatar
 
Join Date: May 2010
Location: Nelson. New Zealand
Posts: 2,007
Default Re: Quickchange rear end

Hardtimes , The offer to deliver was snapped up immediately ,
correct, on V8
No winters PA supply then, best ones made ,
catch up with you down the road,
quickchange is offline   Reply With Quote
Old 03-28-2018, 01:52 PM   #13
hardtimes
Senior Member
 
hardtimes's Avatar
 
Join Date: May 2010
Location: South California
Posts: 6,188
Smile Re: Quickchange rear end

Quote:
Originally Posted by quickchange View Post
Hardtimes , The offer to deliver was snapped up immediately ,
correct, on V8
No winters PA supply then, best ones made ,
catch up with you down the road,


I betting that Scott got it ,eh ! He is much younger/quicker on the trigger ! I'm betting that he 'outflanked' me ! A good guy and couldn't go to a better home...well expect to mine !
hardtimes is offline   Reply With Quote
Old 03-28-2018, 11:11 PM   #14
quickchange
Senior Member
 
quickchange's Avatar
 
Join Date: May 2010
Location: Nelson. New Zealand
Posts: 2,007
Default Re: Quickchange rear end

The early bird gets the worm BUT the 2nd mouse gets the cheese , ??
quickchange is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 01:23 AM.