|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
12-26-2013, 02:38 PM | #1 |
Junior Member
Join Date: Dec 2013
Location: Normal, Illinois
Posts: 22
|
How to read a 1950 F1 VIN Plate off the firewall?
Trying to determine, if possible, the original color of my 1950 F1 pickup from the stampings on the firewall. It reads: 98RC260870 A TL.
Then next to the right of the plate are numbers/letter stamped directly on the firewall 512K1793. Any help would be apprieciated THANKS! |
12-26-2013, 03:02 PM | #2 |
Senior Member
Join Date: Oct 2010
Location: North Pole, Alaska
Posts: 1,470
|
Re: How to read a 1950 F1 VIN Plate off the firewall?
If you can pull the vin plate off you may find the orig color under it. When I restored my 45 truck it was the only place I found good paint.
|
Sponsored Links (Register now to hide all advertisements) |
|
12-26-2013, 04:02 PM | #3 |
Senior Member
Join Date: Jan 2012
Location: Lyman,ME.
Posts: 2,629
|
Re: How to read a 1950 F1 VIN Plate off the firewall?
Keep searching on Google and you will eventually find a site that can break down the VIN. or see if the EFV8 club has an official restoration book......Mark
__________________
I'm thinkin' about crankin' My ragged ol' truck up and haulin' myself into town. Billy Joe Shaver |
12-26-2013, 05:36 PM | #4 |
Senior Member
Join Date: Mar 2011
Location: Northwest Iowa
Posts: 117
|
Re: How to read a 1950 F1 VIN Plate off the firewall?
|
12-26-2013, 05:59 PM | #5 |
Senior Member
|
Re: How to read a 1950 F1 VIN Plate off the firewall?
|
12-26-2013, 07:14 PM | #6 |
Senior Member
Join Date: Jan 2012
Location: Nine Mile Falls,WA
Posts: 900
|
Re: How to read a 1950 F1 VIN Plate off the firewall?
Sponsored Links (Register now to hide all advertisements)
|
12-26-2013, 07:34 PM | #7 |
Senior Member
Join Date: Jun 2010
Location: San Antonio, Texas
Posts: 16,431
|
Re: How to read a 1950 F1 VIN Plate off the firewall?
Prior to 51, those firewall codes were harder to decipher.
This discussion was a good one. http://www.ford-trucks.com/forums/42...ut-off-47.html There are a few here on the Barn too. Some of the guys that responded on that forum also respond here as well. |
12-26-2013, 07:38 PM | #8 | |
Senior Member
Join Date: May 2010
Location: Kalispell Montana
Posts: 344
|
Re: How to read a 1950 F1 VIN Plate off the firewall?
Quote:
They're pretty easy: 9 - 49 or 50 and your's is close to the cutoff, it was probably a '49 but sold and titled in 50 (if you're sure of the title) 8R - 239 flathead V8 C - half ton pickup 260870 - actual serial number assigned to the truck ATL - Atlanta assembly plant Firewall: 5 - Sheridan Blue exterior color 12K - produced October 12, 1949 (at the time Ford was using the calendar year as model year for trucks) 1793 - vehicle down the line (doesn't really have much meaning that we have been able to determine) Hope this helps! Tim |
|
12-27-2013, 12:07 PM | #9 |
Junior Member
Join Date: Dec 2013
Location: Normal, Illinois
Posts: 22
|
Re: How to read a 1950 F1 VIN Plate off the firewall?
Yes, Thank you mtflat, helps alot!!
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|