Go Back   The Ford Barn > General Discussion > Late V8 (1954+)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 08-19-2021, 07:20 AM   #1
Shoovel
Member
 
Shoovel's Avatar
 
Join Date: Mar 2021
Location: Milton Ontario Canada
Posts: 83
Default 55 T Bird Ford o matic

My friends 55 TBird has some bad leaks at the trans. He has a workshop manual but, the FordOmatic is in a separate book. From what I am able to gather, the trans has to come out with the engine. Is this correct?
Shoovel is offline   Reply With Quote
Old 08-19-2021, 10:07 AM   #2
dmsfrr
Senior Member
 
dmsfrr's Avatar
 
Join Date: Aug 2012
Location: Abq, NM
Posts: 3,598
Default Re: 55 T Bird Ford o matic

Depending on where the leaks are, fixing them with the trans in the car may be possible but not overly likely.

There are some transmission mechanics with enough experience they can disassemble the transmission in place. They're very hard to find and their job isn't easy in such a small space.
Most transmission shops these days don't even know what a FordOmatic is.
If you can find a shop that will work on it & warranty their work it's a good day.

The usual procedure is to remove the engine & transmission together.
'55 was the last full model year for the air-cooled FordOmatic, it was phased out during '56.

Mission creep is very real. While the transmission is being removed and/or in the shop, a whole list of other things will be found under the hood that should be fixed 'as long as it's already apart'.
Time and budget will likely go out the window.
.
Attached Images
File Type: jpg 0720141635.jpg (70.1 KB, 18 views)
File Type: jpg air cooled bellhousing.jpg (54.9 KB, 16 views)
File Type: jpg air cooled torque converter.jpg (73.3 KB, 22 views)

Last edited by dmsfrr; 08-19-2021 at 02:15 PM. Reason: add words
dmsfrr is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 08-19-2021, 01:13 PM   #3
Bigmacmclaughlin
Junior Member
 
Join Date: Aug 2021
Posts: 17
Default Re: 55 T Bird Ford o matic

When you get the automatic transmission out and ready to inspect or rebuild, decide whether you want to replace the metal starter gear ring on the torque converter. I decided to replace mine, so that I wouldn’t have to pull the transmission again for a new gear ring later on.
Bigmacmclaughlin is offline   Reply With Quote
Old 08-19-2021, 01:30 PM   #4
rotorwrench
Senior Member
 
rotorwrench's Avatar
 
Join Date: Jun 2010
Location: San Antonio, Texas
Posts: 16,372
Default Re: 55 T Bird Ford o matic

Unless it is an obvious leak, it can be difficult to find. The oil pan & maby the rear seal are about the only easy fixes in the car. The front seal and torque converter are not. If the trans can be removed, the procedure will be in the factory shop manual.
rotorwrench is offline   Reply With Quote
Old 08-19-2021, 02:03 PM   #5
55blacktie
Senior Member
 
Join Date: Aug 2020
Posts: 441
Default Re: 55 T Bird Ford o matic

As the OP already stated, the 1955 Ford Shop Manual does not provide instructions for removing the Fordomatic separately. That information, however, might be in the Fordomatic manual.
55blacktie is offline   Reply With Quote
Old 08-19-2021, 03:11 PM   #6
delco1946
Senior Member
 
delco1946's Avatar
 
Join Date: Dec 2017
Location: Gladstone, OR
Posts: 170
Default Re: 55 T Bird Ford o matic

Sponsored Links (Register now to hide all advertisements)
You need the separate transmission manual. Its level of detail far exceeds that within the normal shop manual, which glosses over the automatic.
delco1946 is offline   Reply With Quote
Old 08-19-2021, 07:51 PM   #7
paul2748
Senior Member
 
paul2748's Avatar
 
Join Date: May 2010
Location: Midland Park, NJ
Posts: 3,965
Default Re: 55 T Bird Ford o matic

There is a separate Fordomatic shop manual. It's available at the TBird parts suppliers and should be at all the other Ford parts suppliers. Even ebay.
__________________
48 Ford Conv
56 Tbird
54 Ford Victoria
paul2748 is offline   Reply With Quote
Old 08-21-2021, 06:03 AM   #8
KULTULZ
Senior Member
 
KULTULZ's Avatar
 
Join Date: Aug 2012
Location: IN A 'GALAXIE' FAR FAR AWAY
Posts: 6,418
Unhappy Re: 55 T Bird Ford o matic

Listen, you don't really want to disassemble the trans in the chassis except possibly for a very specific service repair. Too much chance of filth infiltration.

It needs to be performed on the bench whereas the final assembly is known to have been correctly done.
__________________
*****

- DISCLAIMER -

The above posted information is in my opinion only (IMO) and may contain copy and paste material(s).

In addition, any above tech information is supplied in good faith. No responsibility implied or otherwise can be accepted for the way others use or interpret provided data.

Your experience(s), opinion(s) and mileage may vary.

DIAGNOSED CDO - (OCD In Correct Alphabetical Order)
KULTULZ is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 06:39 PM.