|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
03-13-2011, 11:41 PM | #1 |
Senior Member
Join Date: May 2010
Location: Seattle
Posts: 389
|
1933-1934 Ford truck Cab
This is a 1933-1934 ford truck cab. The back has been cut off by the PO to stretch the cab or replace it or something. It was done by drilling out the welds on the b pillar. It should go back on easy. The cab back is very straight. I also have a couple body line pieces to throw in for the stretch if desired. It has a windshield frame with broken glass. No firewall, dash, and effectively no doors. though it does come with a REALLY rough drivers door. It does have some rust in places, but is fixable. It probably needs a subframe. Asking 700 OBO thanks. Per the rules please PM me and please don't post in the ad. thanks.
__________________
Matt in Seattle |
03-14-2011, 07:50 PM | #2 |
Senior Member
Join Date: May 2010
Location: Huntsville Al
Posts: 1,526
|
Re: 1933-1934 Ford truck Cab
Wrong section. Move to the classifieds.
|
Sponsored Links (Register now to hide all advertisements) |
|
03-14-2011, 08:01 PM | #3 |
Senior Member
Join Date: May 2010
Posts: 642
|
Re: 1933-1934 Ford truck Cab
The cab is a 1934 as I can just see the end of the WIDE rib on the back of the cab. The 33 did not have that as far as I know. Hope this helps. kc
|
03-15-2011, 01:28 AM | #4 |
Senior Member
Join Date: May 2010
Location: Seattle
Posts: 389
|
Re: 1933-1934 Ford truck Cab
Sponsored Links (Register now to hide all advertisements)
__________________
Matt in Seattle |
|
|
Sponsored Links (Register now to hide all advertisements) |
|