|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
08-18-2014, 12:23 PM | #1 |
Senior Member
Join Date: May 2010
Posts: 410
|
Fenton Headers in 40 car with Columbia
Anyone dealt with exhaust pipe and header clearance on the clutch pedal to valve disengagement linkage rod in 40 with 2 speed? Will Fentons work?
|
08-18-2014, 01:16 PM | #2 |
Senior Member
Join Date: May 2010
Location: imperial,mo
Posts: 694
|
Re: Fenton Headers in 40 car with Columbia
i installed a Columbia in my `37 1/2 ton [same chassis as a `40] and used Fenton headers. i had to mill about .070" off the mounting face of the headers to clear the steering box and i had to modify the clamp-on clutch pedal bracket slightly. i think i had to offset the clamp-on clutch pedal bracket about 3/4" to clear the head pipe. i`ll post a few images later if you want.
tom |
Sponsored Links (Register now to hide all advertisements) |
|
08-18-2014, 03:20 PM | #3 |
Senior Member
Join Date: May 2010
Location: Columbia, SC
Posts: 1,579
|
Re: Fenton Headers in 40 car with Columbia
I had no problems installing a Columbia two-speed axle in my '40 with Fenton headers.
|
08-18-2014, 04:34 PM | #4 |
Senior Member
Join Date: May 2010
Location: imperial,mo
Posts: 694
|
Re: Fenton Headers in 40 car with Columbia
here are the images.
tom |
08-18-2014, 09:43 PM | #5 |
Senior Member
Join Date: May 2010
Posts: 410
|
Re: Fenton Headers in 40 car with Columbia
Sponsored Links (Register now to hide all advertisements)
|
Thread Tools | |
Display Modes | |
|
|
Sponsored Links (Register now to hide all advertisements) |
|