The Ford Barn

Neil Wilson · 12-04-2016, 09:08 PM

I am looking for pictures of the front fender bracket which was used starting June 1931. It has the channel extended to the bottom of the bracket and required a longer bolt.

FYI - Pictures are to be used in an article I am writing. So, they would get published.

Neil Wilson · 12-06-2016, 01:04 PM

Pictures would be great please.

Steve Plucker · 12-06-2016, 02:14 PM

Is there anyone out there in Model A land that can help Mr. Wilson?

Thanks.

Pluck

Arcieri · 12-06-2016, 06:31 PM

Hi Neil,

Saw your post on the AA forum and figured you were looking for the ones for AA Fords.

If you need photos of the brackets for Model A's (same for AA's ??) then I have the ones from my 1931 Deluxe Tudor, frame number A4515098.

They are the ones on the left in the photo. The ones on the right are a couple that I purchased at two different swap meets.

The tops are very different among the four. The ones from my car match pretty well. The other two have different tops. Different manufactures ?

Ray

Bill Cilker · 12-06-2016, 07:04 PM

Neil
I have the late 31 AA brackets with the reinforcing piece by the frame. I can take pictures if you need them.
Bill

Neil Wilson · 12-06-2016, 09:02 PM

Sponsored Links (Register now to hide all advertisements)

Quote:

Originally Posted by Bill Cilker

Neil
I have the late 31 AA brackets with the reinforcing piece by the frame. I can take pictures if you need them.
Bill

Thanks Bill, But I do have that AA bracket.

Neil Wilson · 12-06-2016, 09:06 PM

Quote:

Originally Posted by Arcieri

Hi Neil,

Saw your post on the AA forum and figured you were looking for the ones for AA Fords.

If you need photos of the brackets for Model A's (same for AA's ??) then I have the ones from my 1931 Deluxe Tudor, frame number A4515098.

They are the ones on the left in the photo. The ones on the right are a couple that I purchased at two different swap meets.

The tops are very different among the four. The ones from my car match pretty well. The other two have different tops. Different manufactures ?

Ray

Ray, I saved your picture. Thank you. Do your brackets have a reinforcement spot welded to the frame side?

Arcieri · 12-06-2016, 09:24 PM

Neil

Here are pictures of the backside of the brackets.

Neil Wilson · 12-06-2016, 10:08 PM

Quote:

Originally Posted by Arcieri

Neil

Here are pictures of the backside of the brackets.

Ray, More great shots. And no reinforcement at the fender. Attached is the bracket with a reinforcement. Does anyone have another shot showing the reinforcement?

Bill Cilker · 12-07-2016, 01:59 PM

Neil
I will get you a picture tomorrow
Bill

12-04-2016, 09:08 PM	#1
Neil Wilson Senior Member Join Date: May 2010 Location: Boulder, CO Posts: 559	Front Fender Bracket - June 1931 and after I am looking for pictures of the front fender bracket which was used starting June 1931. It has the channel extended to the bottom of the bracket and required a longer bolt. FYI - Pictures are to be used in an article I am writing. So, they would get published. __________________ [email protected] - email contact https://aafords.com Ford Model AA Truck Club @ aafords.com Last edited by Neil Wilson; 12-06-2016 at 01:02 PM.

12-06-2016, 01:04 PM	#2
Neil Wilson Senior Member Join Date: May 2010 Location: Boulder, CO Posts: 559	Re: Front Fender Bracket - June 1931 and after Pictures would be great please. __________________ [email protected] - email contact https://aafords.com Ford Model AA Truck Club @ aafords.com

12-06-2016, 02:14 PM	#3
Steve Plucker BANNED Join Date: May 2010 Location: Walla Walla, Washington USA Posts: 6,066	Re: Front Fender Bracket - June 1931 and after Is there anyone out there in Model A land that can help Mr. Wilson? Thanks. Pluck

12-06-2016, 06:31 PM	#4
Arcieri Senior Member Join Date: Mar 2012 Location: Lakewood, Colorado Posts: 158	Re: Front Fender Bracket - June 1931 and after Hi Neil, Saw your post on the AA forum and figured you were looking for the ones for AA Fords. If you need photos of the brackets for Model A's (same for AA's ??) then I have the ones from my 1931 Deluxe Tudor, frame number A4515098. They are the ones on the left in the photo. The ones on the right are a couple that I purchased at two different swap meets. The tops are very different among the four. The ones from my car match pretty well. The other two have different tops. Different manufactures ? Ray

12-06-2016, 07:04 PM	#5
Bill Cilker Senior Member Join Date: Apr 2011 Location: Milpitas, CA Posts: 398	Re: Front Fender Bracket - June 1931 and after Neil I have the late 31 AA brackets with the reinforcing piece by the frame. I can take pictures if you need them. Bill __________________ Bill Cilker, Jr Unrestored 190A Victoria 45B, 160B & 189A Victoria Association President

12-06-2016, 09:24 PM	#8
Arcieri Senior Member Join Date: Mar 2012 Location: Lakewood, Colorado Posts: 158	Re: Front Fender Bracket - June 1931 and after Neil Here are pictures of the backside of the brackets.

12-07-2016, 01:59 PM	#10
Bill Cilker Senior Member Join Date: Apr 2011 Location: Milpitas, CA Posts: 398	Re: Front Fender Bracket - June 1931 and after Neil I will get you a picture tomorrow Bill __________________ Bill Cilker, Jr Unrestored 190A Victoria 45B, 160B & 189A Victoria Association President

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode