Go Back   The Ford Barn > General Discussion > Model A (1928-31)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 02-02-2018, 05:55 PM   #1
fiftychev
Junior Member
 
Join Date: Oct 2012
Posts: 23
Default Brake Drums

I plan to buy new cast brake drums. Is there any reason why I can't install my current hubs on the new drums? The hubs are fine but the drums are a little thin. Will the normal studs work?
fiftychev is offline   Reply With Quote
Old 02-02-2018, 06:13 PM   #2
JDupuis
Senior Member
 
JDupuis's Avatar
 
Join Date: Jan 2017
Location: Maryhill Ont Canada
Posts: 834
Default Re: Brake Drums

Hey fiftychev, you can use your current hubs for the cast iron drum conversion. You will need to purchase Model A wheel studs. Keep in mind, they need to be swedged on with a minimum 20 ton press. Hope this helps. Jeff
__________________
Let's let pylons, be pylons!
JDupuis is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 02-02-2018, 06:26 PM   #3
kenparker
Senior Member
 
kenparker's Avatar
 
Join Date: May 2010
Location: Van, Texas
Posts: 1,122
Default Re: Brake Drums

IN answer to your initial question , "Will the normal studs work?". NO. you will need studs that are made for th new cast iron drums. The metal on the cast iron drums is thicker than the original steel drums, thus you need studs with longer shoulder.

I use a 40 ton press, but only about 28-30 of the tonnage is used for the studs. A 20 ton press will not give sufficient swedge.
kenparker is offline   Reply With Quote
Old 02-02-2018, 06:33 PM   #4
Tom Endy
Senior Member
 
Tom Endy's Avatar
 
Join Date: May 2010
Location: Southern California
Posts: 3,122
Default Re: Brake Drums

Unless you have a 20 ton press, a swaging tool, an undercutting tool, and a bunch of other specialized tooling, not to mention the know how, you stand a good chance of warping the hub flanges and cracking the new cast iron drums. New studs are out there in a number of diameters and if you use those that are too large you will definitely crack the new drums.

The art of swaging is a lost art. Those that knew how to do it retired with the greatest generation years ago. Best let Randy Gross do the job for you. He knows what he is doing, has all the tooling, his prices are reasonable, and he is a nice fellow to do business with.

Tom Endy
Tom Endy is offline   Reply With Quote
Old 02-02-2018, 07:17 PM   #5
Bob-A
Senior Member
 
Bob-A's Avatar
 
Join Date: May 2010
Location: Central FL, USA
Posts: 1,136
Thumbs up Re: Brake Drums

Bert's in Denver, CO did my new drums with original hubs. He also replaced
all brake shoes with new woven linings. And arched the shoes to each individual drum. Money well spent!

Bob-A
Bob-A is offline   Reply With Quote
Old 02-02-2018, 09:06 PM   #6
redmodelt
Senior Member
 
redmodelt's Avatar
 
Join Date: May 2010
Location: Portland OR
Posts: 6,339
Default Re: Brake Drums

Sponsored Links (Register now to hide all advertisements)
You can buy a good straight cut swedge cutter, you are not needing to save the drums anyway. You also should have the flanges check for flatness. Most need a little clean up. Most dealers carry the tools needed to swedge the studs and yes there is a different length stud when using the cast iron drum.
__________________
I know the voices aren't real but damn they have some good ideas!
redmodelt is offline   Reply With Quote
Old 02-02-2018, 09:20 PM   #7
Bill G
Senior Member
 
Bill G's Avatar
 
Join Date: Jun 2017
Location: Walla Walla, WA
Posts: 1,044
Default Re: Brake Drums

I got new drums from Randy Gross with new studs. I took the old ones to the local automotive machine shop. They cut the old ones off the hubs and swaged the new ones on.

That particular machine shop is the "go-to" machine shop in town for us who have old cars. He know his stuff.

I am very happy with the drums.
Bill G is offline   Reply With Quote
Old 02-02-2018, 09:16 PM   #8
aford193031
Member
 
aford193031's Avatar
 
Join Date: Nov 2011
Location: Pearland, Texas
Posts: 85
Default Re: Brake Drums

Check out Randy Gross and his brake drums. He posts on here guite often.
aford193031 is offline   Reply With Quote
Old 02-03-2018, 10:55 AM   #9
BillCNC
Senior Member
 
BillCNC's Avatar
 
Join Date: Aug 2017
Location: SoCal Desert
Posts: 826
Default Re: Brake Drums

Quote:
Originally Posted by aford193031 View Post
Check out Randy Gross and his brake drums. He posts on here guite often.
+1

Great service and quality part's!

Regards
Bill
BillCNC is offline   Reply With Quote
Old 02-02-2018, 10:02 PM   #10
Charlie Stephens
Senior Member
 
Join Date: May 2010
Location: Southern California
Posts: 7,017
Default Re: Brake Drums

I would have the old drums removed and the new drums installed by the person I bought the drums from. That way if anything goes wrong you know where to go to get it fixed. You should add your general location to your profile.

Charlie Stephens
Charlie Stephens is offline   Reply With Quote
Old 02-03-2018, 09:12 AM   #11
fiftychev
Junior Member
 
Join Date: Oct 2012
Posts: 23
Default Re: Brake Drums

Thanks For all the helpful responses. You guys are a great source of information on the Model A
fiftychev is offline   Reply With Quote
Old 02-03-2018, 02:52 PM   #12
redmodelt
Senior Member
 
redmodelt's Avatar
 
Join Date: May 2010
Location: Portland OR
Posts: 6,339
Default Re: Brake Drums

Even if you ship the hubs and drums to Randy you could still use the swedge cutting tool and remove the drums. The savings on ship to cost should out weigh the cost of the cutter.
__________________
I know the voices aren't real but damn they have some good ideas!
redmodelt is offline   Reply With Quote
Old 02-03-2018, 03:09 PM   #13
Vic in E-TN
Senior Member
 
Join Date: May 2010
Location: Maryville, TN
Posts: 491
Default Re: Brake Drums

Ace hardware has a 9/16 in steel hole cutter. This costs about $10. The ID is 1/2 in. You should use a drill press to do the job. Use the cutter to the proper depth and drop the drum flat on a concrete floor and the hub should just pop off. You can send the hubs for a lot less money in a USPS flat rate box. I recommend Randy Gross for the drums and new molded linings by Gross also. His phone number is on the "Sticky" section of this forum.

Vic
Vic in E-TN is offline   Reply With Quote
Old 02-04-2018, 11:31 AM   #14
SwansEarlyFord
Junior Member
 
Join Date: Dec 2015
Location: Virgina
Posts: 18
Default Re: Brake Drums

The folks at Bratton's offer a new drum to your old hub service.
SwansEarlyFord is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 03:36 PM.