The Ford Barn

lotsagas4u · 01-10-2020, 02:52 PM

Hello, does anyone have a side picture of a early 33 front frame horn, mine are damaged, trying to figure out where the original holes were located, this is a February built coupe. I know they are 2 3/8 wide.

Thanks for the help.

cas3 · 01-10-2020, 03:01 PM

you just need the front part after the dip in the rail? further back than the fender mount? pictures, or mail you a template?

lotsagas4u · 01-10-2020, 03:11 PM

Cas3, thanks for your quick reply, a side pix from the large fender brace forward would be great, I have a new set of frame horns ordered, may need that template, any pix would help,

Thanks again for your generosity

cas3 · 01-10-2020, 03:40 PM

canadian 33 frame, if that makes a difference

lotsagas4u · 01-10-2020, 04:06 PM

Thank you for the pix, that is the later 33/34 pattern I believe.

petehoovie · 01-10-2020, 04:53 PM

Sponsored Links (Register now to hide all advertisements)

Nothing to see here...

lotsagas4u · 01-13-2020, 07:08 AM

Still looking for a early 33 frame horn pix?

V8COOPMAN · 01-13-2020, 11:49 AM

Quote:

Originally Posted by lotsagas4u

Still looking for a early 33 frame horn pix?

Apparently, the horns on this '33 were cut-off to some degree at some point, but there are a whole bunch of frame horn pics in this 3-page thread to get some different angles. Click the link! DD

https://www.jalopyjournal.com/forum/.../#post-6814478

01-10-2020, 02:52 PM	#1
lotsagas4u Senior Member Join Date: Apr 2011 Location: Plainview, Texas Posts: 757	1933 front frame horns Hello, does anyone have a side picture of a early 33 front frame horn, mine are damaged, trying to figure out where the original holes were located, this is a February built coupe. I know they are 2 3/8 wide. Thanks for the help.

01-10-2020, 03:01 PM	#2
cas3 Senior Member Join Date: Jan 2011 Location: sw minnesota Posts: 4,567	Re: 1933 front frame horns you just need the front part after the dip in the rail? further back than the fender mount? pictures, or mail you a template?

01-10-2020, 03:11 PM	#3
lotsagas4u Senior Member Join Date: Apr 2011 Location: Plainview, Texas Posts: 757	Re: 1933 front frame horns Cas3, thanks for your quick reply, a side pix from the large fender brace forward would be great, I have a new set of frame horns ordered, may need that template, any pix would help, Thanks again for your generosity

01-10-2020, 04:06 PM	#5
lotsagas4u Senior Member Join Date: Apr 2011 Location: Plainview, Texas Posts: 757	Re: 1933 front frame horns Thank you for the pix, that is the later 33/34 pattern I believe.

01-10-2020, 04:53 PM	#6
petehoovie Senior Member Join Date: May 2015 Posts: 8,076	Re: 1933 front frame horns Sponsored Links (Register now to hide all advertisements) Nothing to see here... __________________ The only thing nice about being imperfect is the joy it brings to others.... *"Silver rings, your butt! Them's washers!"* "We shot our way out of that town for a dollar's worth of steel holes!" - from 'The Wild Bunch' - 1969 https://www.youtube.com/watch?v=7NReUd2_0u0 Last edited by petehoovie; 01-13-2020 at 11:59 AM.

01-13-2020, 07:08 AM	#7
lotsagas4u Senior Member Join Date: Apr 2011 Location: Plainview, Texas Posts: 757	Re: 1933 front frame horns Still looking for a early 33 frame horn pix?