Go Back   The Ford Barn > General Discussion > Model A (1928-31)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 10-06-2014, 05:01 PM   #1
56servi
Senior Member
 
56servi's Avatar
 
Join Date: Nov 2012
Location: Commerce Twp, Mi
Posts: 143
Default Rear Bumper Clamp Cam Apart

The rear bumper clamp on my 31 S/W was laying on the floor when I went out today. The stud had pulled out of the clamp. Not sure if its original or repo. It was on the car when I got it. It does have P.A stamped on the back side.

The bend of the bumper bracket doesn't line up with the bumper perfectly so there is slight spring tension on the clamp.

The construction of the clamp doesn't look like it is very strong. Not a lot holding the stud in the clamp.

Which are the best repos out there. Don't like the idea of the bumper falling off going down the road.
Attached Images
File Type: jpg Bumper Bracket3.jpg (56.8 KB, 27 views)
File Type: jpg Bumper Bracket4.jpg (39.8 KB, 27 views)
File Type: jpg Bumper Bracket5.jpg (45.0 KB, 23 views)
56servi is offline   Reply With Quote
Old 10-06-2014, 05:05 PM   #2
Tim Armstrong
Senior Member
 
Tim Armstrong's Avatar
 
Join Date: May 2010
Location: NW Arkansas
Posts: 361
Default Re: Rear Bumper Clamp Cam Apart

Those are aluminum, very poor repo. They will let you down litterly.
Tim Armstrong is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 10-06-2014, 05:07 PM   #3
msmaron
Senior Member
 
msmaron's Avatar
 
Join Date: May 2010
Location: Wauconda, IL
Posts: 3,600
Send a message via AIM to msmaron
Default Re: Rear Bumper Clamp Cam Apart

Either find originals or call A & L for some Great Re-Pops
__________________
Mark Maron
Ill., Region MARC & MAFCA
MARC JSC Member MAFFI Trustee
National Facebook Admin.
https://www.facebook.com/groups/MARC.group/

A7191-Sport Coupe
29 Roadster
29-Town Sedan
29-Original Special Coupe
msmaron is offline   Reply With Quote
Old 10-06-2014, 05:29 PM   #4
700rpm
Senior Member
 
700rpm's Avatar
 
Join Date: May 2010
Location: Portland, Oregon
Posts: 5,906
Default Re: Rear Bumper Clamp Cam Apart

Get the best you can find for the front bumper, at least. If one of those clamps lets go up front while you're cruising down the road, it ain't gonna be pretty.
__________________
Ray Horton, Portland, OR


As you go through life, keep your eye on the donut, not the hole.
700rpm is offline   Reply With Quote
Old 10-06-2014, 05:40 PM   #5
CarlG
Senior Member
 
CarlG's Avatar
 
Join Date: Nov 2010
Location: Anchorage, Alaska
Posts: 9,115
Default Re: Rear Bumper Clamp Cam Apart

I had a pair those type clamps on the front bumper (were on the vehicle when I bought it). You can imagine the mess it made when using a tow bar that only clamped on the bumper. Several degrees earned in the School of Hard Knocks that day!
Attached Images
File Type: jpg DSCN0991.JPG (139.3 KB, 16 views)
File Type: jpg DSCN0996.JPG (135.1 KB, 14 views)
__________________
Alaskan A's
Antique Auto Mushers of Alaska
Model A Ford Club of America
Model A Restorers Club
Antique Automobile Club of America
Mullins Owner's Club

Last edited by CarlG; 10-06-2014 at 08:00 PM. Reason: add pix
CarlG is offline   Reply With Quote
Old 10-06-2014, 05:55 PM   #6
jw hash
Senior Member
 
jw hash's Avatar
 
Join Date: May 2010
Location: Auburn Washington
Posts: 2,552
Default Re: Rear Bumper Clamp Cam Apart

Sponsored Links (Register now to hide all advertisements)
Them clamps are junk. A friend of ours wife was driving his 29 pick up, the front bumper fell off and she ran over.
jw hash is offline   Reply With Quote
Old 10-06-2014, 07:08 PM   #7
Tom Wesenberg
Senior Member
 
Tom Wesenberg's Avatar
 
Join Date: May 2010
Location: Mpls, MN
Posts: 27,582
Default Re: Rear Bumper Clamp Cam Apart

It's hard to believe someone actually made that junk and thought it would stay together.
Give Bert's a call for original clamps, or A&L for some quality repro clamps.
Tom Wesenberg is offline   Reply With Quote
Old 10-06-2014, 07:31 PM   #8
BILL WILLIAMSON
Senior Member
 
BILL WILLIAMSON's Avatar
 
Join Date: Dec 2010
Location: FRESNO, CA
Posts: 12,560
Default Re: Rear Bumper Clamp Cam Apart

Quote:
Originally Posted by jw hash View Post
Them clamps are junk. A friend of ours wife was driving his 29 pick up, the front bumper fell off and she ran over.
A lady here in town, posted on Craig's List, that her front Model A bumper fell off, she went around the block to retrieve it, & some Son of a Bitch had STOLEN IT!!! The FOUL words she used, +*#%#@++&@#%^turned my whole monitor screen an ICY BLUE!!
Bill W.
__________________
"THE ASSISTANT GURU OF STUFF"
BILL WILLIAMSON is offline   Reply With Quote
Old 10-06-2014, 08:18 PM   #9
P.S.
Senior Member
 
Join Date: Jul 2012
Location: California
Posts: 1,696
Default Re: Rear Bumper Clamp Cam Apart

The cast bumper clamps are notorious for coming apart, at the worst moment. The ones you want are the forged clamps like these-

Sacramento Vintage Ford part number 01121-0
P.S. is offline   Reply With Quote
Old 10-06-2014, 08:39 PM   #10
56servi
Senior Member
 
56servi's Avatar
 
Join Date: Nov 2012
Location: Commerce Twp, Mi
Posts: 143
Default Re: Rear Bumper Clamp Cam Apart

I will get 2 back ones from A&L. Need to look at the front to see what I have

Thanks
Gene
56servi is offline   Reply With Quote
Old 10-07-2014, 09:40 AM   #11
56servi
Senior Member
 
56servi's Avatar
 
Join Date: Nov 2012
Location: Commerce Twp, Mi
Posts: 143
Default Re: Rear Bumper Clamp Cam Apart

These are what I have on my front bumper. They look much stronger
Attached Images
File Type: jpg Front Bumper Clamp2.jpg (45.8 KB, 7 views)
File Type: jpg Front Bumper Clamp1.jpg (60.7 KB, 12 views)
56servi is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 08:37 PM.