|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
06-05-2016, 07:33 PM | #1 |
BANNED
Join Date: May 2010
Posts: 3,019
|
Main drive gear
Don't beat up too bad but I need the best coverage on this...........
Does anyone have or know of an available 17 tooth main drive gear for the T 85 BW 3 spd trans ? This gear has the 1 1/16 10 spline and is 40% bigger than the '49-'56 Ford/Merc part. This type trans was used in big block Ford, Buicks, Olds, Packards etc in the mid 50's to mid 60's. Gracias, Charlie ny |
06-06-2016, 08:57 AM | #2 |
Senior Member
Join Date: Jun 2010
Location: San Antonio, Texas
Posts: 16,367
|
Re: Main drive gear
I've seen them on flea-pay but not for a while. The 17-tooth was the first of the "diamond cut" type gears starting in 1951. A lot of the trucks should have had this transmission after 1951. Maybe Mac VanPelt has one.
|
Sponsored Links (Register now to hide all advertisements) |
|
06-06-2016, 12:38 PM | #3 |
Senior Member
Join Date: May 2013
Location: Coos Bay, OR
Posts: 640
|
Re: Main drive gear
Do you have a part number for that gear? I have a fair selection of NOS gears at the moment. Either the Ford number or one of the other common numbers like Perfection, Lempco or Republic.
|
06-06-2016, 05:26 PM | #4 |
Senior Member
Join Date: May 2010
Location: Cincinnati, OH
Posts: 1,356
|
Re: Main drive gear
Sponsored Links (Register now to hide all advertisements)
__________________
VANPELT SALES LLC Cincinnati, Ohio Office: 513-724-9486 www.vanpeltsales.com www.classictransmission.com |
Thread Tools | |
Display Modes | |
|
|
Sponsored Links (Register now to hide all advertisements) |
|