06-13-2016, 07:51 PM | #1 |
Senior Member
Join Date: May 2010
Location: Alto, Tx.
Posts: 299
|
31 radiator
Suggestions please as to where I can buy a new radiator for my coupe. Thanks in advance.Jim
|
06-13-2016, 08:05 PM | #2 |
Senior Member
Join Date: May 2010
Location: Rhode Island
Posts: 1,868
|
Re: 31 radiator
I would buy an original radiator with a bad core and have it recored. It will fit best
|
Sponsored Links (Register now to hide all advertisements) |
|
06-13-2016, 08:48 PM | #3 |
Senior Member
Join Date: Jun 2010
Location: (Old)Shasta (Redding) CA
Posts: 385
|
Re: 31 radiator
I agree, having it re-cored locally gives you some one to talk to in the event of a problem.
A good shop can supply just about any type core you want. JB
__________________
Connoisseur of Rust |
06-13-2016, 08:56 PM | #4 |
Senior Member
Join Date: May 2010
Location: Hebron, CT
Posts: 432
|
Re: 31 radiator
I agree with previous recommendation to have an original radiator recored. I use Maine Radiator, Lewiston, ME. They are the best manufacturer of cores. If you have a real radiator shop near you have the solder on the upper & lower cans to the new core.
Check them out. http://maineradiator.com/ |
06-13-2016, 10:45 PM | #5 |
Senior Member
Join Date: Jun 2010
Location: Middleburg, Virginia
Posts: 421
|
Re: 31 radiator
This man is in Texas which the last time I looked is a right smart ways from CT
Get a Bergs and be done with it. I don't have one 'cause mine is good but to my knowledge the fit and function of Bergs has not had one complaint here in the barn Sewall |
06-13-2016, 10:46 PM | #6 | |
Senior Member
|
Re: 31 radiator
Sponsored Links (Register now to hide all advertisements)
Quote:
Show, Brassworks Go, Bergs
__________________
What's right about America is that although we have a mess of problems, we have great capacity - intellect and resources - to do some thing about them. - Henry Ford II |
|
06-14-2016, 02:23 AM | #7 |
Senior Member
Join Date: May 2012
Location: Las Vegas
Posts: 138
|
Re: 31 radiator
I have a Berg's and couldn't be happier. The fit was perfect and the car runs cooler than ever. It was 114F outside last week and even sitting in traffic the car wouldn't run hot. I pulled over a couple times to check the temp with an infrared temp gun and water temperature never got much over 200f.
Sent from my Nexus 9 using Tapatalk
__________________
kris |
06-14-2016, 08:09 AM | #8 |
Senior Member
Join Date: May 2010
Location: Alto, Tx.
Posts: 299
|
Re: 31 radiator
Is there any contact information available for bergs. Thanks again Jim
|
06-14-2016, 08:23 AM | #9 |
BANNED
Join Date: May 2010
Location: Bucks County, PA
Posts: 11,454
|
Re: 31 radiator
|
06-14-2016, 08:24 AM | #10 |
Senior Member
Join Date: May 2010
Location: VA
Posts: 1,410
|
Re: 31 radiator
Google says http://www.bergsradiator.com/modela.html
|
06-14-2016, 09:32 AM | #11 | |
Senior Member
Join Date: Nov 2010
Location: Anchorage, Alaska
Posts: 9,115
|
Re: 31 radiator
Quote:
__________________
Alaskan A's Antique Auto Mushers of Alaska Model A Ford Club of America Model A Restorers Club Antique Automobile Club of America Mullins Owner's Club |
|
06-14-2016, 11:14 AM | #12 |
Senior Member
Join Date: May 2010
Location: Mpls, MN
Posts: 27,582
|
Re: 31 radiator
|
06-14-2016, 09:10 PM | #13 |
Member
Join Date: Jan 2016
Posts: 40
|
Re: 31 radiator
Smith and Jones Carries brassworks just put one in my 31 works great
|
06-15-2016, 07:02 AM | #14 |
Senior Member
Join Date: May 2010
Location: Van, Texas
Posts: 1,122
|
Re: 31 radiator
There is a fellow in Whitehouse, Texas - almost your neighbor, that can recore your radiator. He did one for me about year ago . I think he is still working. Jerrys Radiator. Whitehouse, TX. ken
|
06-15-2016, 07:42 AM | #15 |
BANNED
Join Date: May 2010
Location: Walla Walla, Washington USA
Posts: 6,066
|
Re: 31 radiator
Berg's did mine back in about 1979 (original tanks, new core)...still running good on my 1929 St. Coupe. Knock on wood!
Pluck |
06-15-2016, 07:24 PM | #16 |
Senior Member
Join Date: May 2010
Location: Alto, Tx.
Posts: 299
|
Re: 31 radiator
the gentleman named Jerry needs our prayers because he just got out of the hospital and it sounds serious. Thanks Jim
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|